Since this problem isn't yet clearly identified, I'm opening this thread
to see if we can stomp it out finally.
Here you can see another form of the problem:
http://www.dailymotion.com/video/xbwiub_openmoko-glamo-problem-debugging-ai_tech
This was triggered by TangoGPS writing/reading a lot of tiles into
/media/card/Maps.
I booted the FR with /sys/module/glamo_mci/parameters/sd_drive = 8 and
the 512MB Sandisk sdcard that came with the phone. The distro is SHR-U
upgraded 3 days ago.
A dmesg | grep glamo gives:
[21474537.895000] glamo3362 glamo3362.0: Glamo interrupt registered
[21474537.935000] glamo3362 glamo3362.0: Glamo core PLL1: 49119232Hz,
PLL2: 89980928Hz
[21474538.505000] glamo-mci glamo-mci.0: glamo_mci driver (C)2007
Openmoko, Inc
[21474538.505000] glamo-mci glamo-mci.0: probe: mapped mci_base:c88ee400
irq:0.
[21474538.510000] glamo-mci glamo-mci.0: glamo_mci_set_ios: power down.
[21474538.510000] glamo-mci glamo-mci.0: initialisation done.
[21474538.540000] glamo-mci glamo-mci.0: powered (vdd = 20) clk: 0kHz
div=255 (req: 0kHz). Bus width=0
[21474538.550000] glamo-mci glamo-mci.0: powered (vdd = 20) clk: 195kHz
div=255 (req: 195kHz). Bus width=0
[21474538.550000] glamo-mci glamo-mci.0: powered (vdd = 20) clk: 195kHz
div=255 (req: 195kHz). Bus width=0
[21474538.555000] glamo-mci glamo-mci.0: powered (vdd = 20) clk: 195kHz
div=255 (req: 195kHz). Bus width=0
[21474538.555000] glamo-mci glamo-mci.0: Error after cmd: 0x8120
[21474538.555000] glamo-mci glamo-mci.0: Error after cmd: 0x120
[21474538.555000] glamo-mci glamo-mci.0: Error after cmd: 0x8120
[21474538.555000] glamo-mci glamo-mci.0: Error after cmd: 0x120
[21474538.565000] glamo-mci glamo-mci.0: powered (vdd = 15) clk: 195kHz
div=255 (req: 195kHz). Bus width=0
[21474538.565000] glamo-mci glamo-mci.0: powered (vdd = 15) clk: 195kHz
div=255 (req: 195kHz). Bus width=0
[21474538.565000] glamo-mci glamo-mci.0: powered (vdd = 15) clk: 195kHz
div=255 (req: 195kHz). Bus width=0
[21474538.580000] glamo-mci glamo-mci.0: powered (vdd = 15) clk: 195kHz
div=255 (req: 195kHz). Bus width=0
[21474538.585000] glamo-mci glamo-mci.0: powered (vdd = 15) clk:
16666kHz div=2 (req: 16666kHz). Bus width=0
[21474538.585000] glamo-mci glamo-mci.0: powered (vdd = 15) clk:
16666kHz div=2 (req: 16666kHz). Bus width=2
[ 395.725000] glamo-mci glamo-mci.0: command timeout, continuing
[ 1511.655000] glamo-mci glamo-mci.0: command timeout, continuing
Full dmesg is attached.
What else do I need to supply the devs to debug this thing?
[ 0.000000] Linux version 2.6.29-rc3 (s...@opmbuild) (gcc version 4.4.2 (GCC) ) #1 PREEMPT Sat Jan 9 21:09:08 CET 2010
[ 0.000000] CPU: ARM920T [41129200] revision 0 (ARMv4T), cr=c0007177
[ 0.000000] CPU: VIVT data cache, VIVT instruction cache
[ 0.000000] Machine: GTA02
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] On node 0 totalpages: 32768
[ 0.000000] free_area_init_node: node 0, pgdat c03c51ec, node_mem_map c08cd000
[ 0.000000] Normal zone: 256 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 32512 pages, LIFO batch:7
[ 0.000000] CPU S3C2442B (id 0x32440aab)
[ 0.000000] S3C24XX Clocks, (c) 2004 Simtec Electronics
[ 0.000000] S3C244X: core 400.000 MHz, memory 100.000 MHz, peripheral 50.000 MHz
[ 0.000000] CLOCK: Slow mode (1.500 MHz), fast, MPLL on, UPLL on
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
[ 0.000000] Kernel command line: loglevel=4 console=tty0 console=ttySAC2,115200 init=/sbin/init ro mtdparts=physmap-flash:-(nor);neo1973-nand:0x00040000(qi),0x00040000(depr-ub-env),0x00800000(kernel),0x000a0000(depr),0x00040000(identity-ext2),0x0f6a0000(rootfs) g_ether.host_addr=00:1F:11:01:0F:D8 g_ether.dev_addr=00:1F:11:01:0F:D8 rootfstype=jffs2 root=/dev/mtdblock6
[ 0.000000] Unknown boot option `g_ether.host_addr=00:1F:11:01:0F:D8': ignoring
[ 0.000000] Unknown boot option `g_ether.dev_addr=00:1F:11:01:0F:D8': ignoring
[ 0.000000] RCU-based detection of stalled CPUs is enabled.
[ 0.000000] irq: clearing pending ext status 000b12f0
[ 0.000000] irq: clearing pending ext status 000902d0
[ 0.000000] irq: clearing subpending status 00000180
[ 0.000000] irq: clearing subpending status 00000080
[ 0.000000] PID hash table entries: 512 (order: 9, 2048 bytes)
[ 0.000000] timer tcon=00000000, tcnt a2c1, tcfg 00000200,00000000, usec 00001eb8
[21474536.480000] Console: colour dummy device 80x30
[21474536.480000] console [tty0] enabled
[21474536.480000] console [ttySAC2] enabled
[21474536.485000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[21474536.485000] ... MAX_LOCKDEP_SUBCLASSES: 8
[21474536.485000] ... MAX_LOCK_DEPTH: 48
[21474536.485000] ... MAX_LOCKDEP_KEYS: 8191
[21474536.485000] ... CLASSHASH_SIZE: 4096
[21474536.485000] ... MAX_LOCKDEP_ENTRIES: 8192
[21474536.485000] ... MAX_LOCKDEP_CHAINS: 16384
[21474536.485000] ... CHAINHASH_SIZE: 8192
[21474536.485000] memory used by lock dependency info: 2655 kB
[21474536.485000] per task-struct memory footprint: 2304 bytes
[21474536.485000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[21474536.485000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[21474536.505000] Memory: 128MB = 128MB total
[21474536.505000] Memory: 120788KB available (3492K code, 5334K data, 144K init)
[21474536.510000] Calibrating delay loop... 198.65 BogoMIPS (lpj=496640)
[21474536.610000] Mount-cache hash table entries: 512
[21474536.615000] CPU: Testing write buffer coherency: ok
[21474536.630000] net_namespace: 1168 bytes
[21474536.640000] regulator: core version 0.5
[21474536.640000] NET: Registered protocol family 16
[21474536.695000] S3C Power Management, Copyright 2004 Simtec Electronics
[21474536.695000] modem wakeup interrupt
[21474536.695000] wake enabled for irq 17
[21474536.695000] wake enabled for irq 49
[21474536.720000] s3c24xx-adc s3c24xx-adc: attached adc driver
[21474536.725000] S3C2442: Initialising architecture
[21474536.725000] S3C24XX DMA Driver, (c) 2003-2004,2006 Simtec Electronics
[21474536.725000] DMA channel 0 at c8808000, irq 33
[21474536.725000] DMA channel 1 at c8808040, irq 34
[21474536.725000] DMA channel 2 at c8808080, irq 35
[21474536.725000] DMA channel 3 at c88080c0, irq 36
[21474536.725000] S3C244X: Clock Support, DVS off
[21474536.825000] bio: create slab <bio-0> at 0
[21474536.840000] usbcore: registered new interface driver usbfs
[21474536.840000] usbcore: registered new interface driver hub
[21474536.845000] usbcore: registered new device driver usb
[21474536.915000] NET: Registered protocol family 2
[21474536.970000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[21474536.980000] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[21474536.980000] TCP bind hash table entries: 4096 (order: 5, 163840 bytes)
[21474536.980000] TCP: Hash tables configured (established 4096 bind 4096)
[21474536.980000] TCP reno registered
[21474536.995000] NET: Registered protocol family 1
[21474537.010000] gta02-pm-wlan gta02-pm-wlan.0: starting
[21474537.215000] s3c24xx_pwm s3c24xx_pwm.0: s3c24xx_pwm is registered
[21474537.235000] ashmem: initialized
[21474537.240000] JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
[21474537.245000] msgmni has been set to 236
[21474537.260000] alg: No test for stdrng (krng)
[21474537.260000] alg: No test for stdrng (ansi_cprng)
[21474537.265000] io scheduler noop registered
[21474537.265000] io scheduler deadline registered (default)
[21474537.325000] ##### init_resume_dependency_list(head=c03b6b88)
[21474537.325000] s3c2440-uart.0: s3c2410_serial0 at MMIO 0x50000000 (irq = 70) is a S3C2440
[21474537.330000] ##### init_resume_dependency_list(head=c03b6c70)
[21474537.330000] s3c2440-uart.1: s3c2410_serial1 at MMIO 0x50004000 (irq = 73) is a S3C2440
[21474537.335000] ##### init_resume_dependency_list(head=c03b6d58)
[21474537.335000] s3c2440-uart.2: s3c2410_serial2 at MMIO 0x50008000 (irq = 76) is a S3C2440
[21474537.420000] brd: module loaded
[21474537.420000] neo1973-version neo1973-version.0: starting
[21474537.445000] physmap platform flash device: 00200000 at 18000000
[21474537.445000] physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank
[21474537.445000] Intel/Sharp Extended Query Table at 0x0039
[21474537.445000] Intel/Sharp Extended Query Table at 0x0039
[21474537.445000] Intel/Sharp Extended Query Table at 0x0039
[21474537.445000] Intel/Sharp Extended Query Table at 0x0039
[21474537.445000] Intel/Sharp Extended Query Table at 0x0039
[21474537.445000] cfi_cmdset_0001: Erase suspend on write enabled
[21474537.445000] erase region 0: offset=0x0,size=0x2000,blocks=8
[21474537.445000] erase region 1: offset=0x10000,size=0x10000,blocks=31
[21474537.445000] physmap-flash.0: 1 set(s) of 1 interleaved chips --> 4 partitions of 512 KiB
[21474537.450000] RedBoot partition parsing not available
[21474537.460000] S3C24XX NAND Driver, (c) 2004 Simtec Electronics
[21474537.465000] s3c2410_nand_probe(c039ec60)
[21474537.465000] s3c2440-nand s3c2440-nand: mapped registers at c9000000
[21474537.465000] result 1 from 100000, 0
[21474537.465000] result 3 from 100000, 25
[21474537.465000] result 2 from 100000, 15
[21474537.465000] s3c2440-nand s3c2440-nand: Tacls=1, 10ns Twrph0=3 30ns, Twrph1=2 20ns
[21474537.465000] s3c2440-nand s3c2440-nand: NF_CONF is 0xf618
[21474537.465000] initialising set 0 (c79b5000, info c799cec0)
[21474537.465000] NAND device: Manufacturer ID: 0xec, Chip ID: 0xaa (Samsung NAND 256MiB 1,8V 8-bit)
[21474537.465000] s3c2440-nand s3c2440-nand: chip c79b50d0 => page shift 11
[21474537.465000] Bad block table found at page 131008, version 0x01
[21474537.465000] Bad block table found at page 130944, version 0x01
[21474537.465000] 6 cmdlinepart partitions found on MTD device neo1973-nand
[21474537.465000] Creating 6 MTD partitions on "neo1973-nand":
[21474537.465000] 0x000000000000-0x000000040000 : "qi"
[21474537.475000] 0x000000040000-0x000000080000 : "depr-ub-env"
[21474537.485000] 0x000000080000-0x000000880000 : "kernel"
[21474537.490000] 0x000000880000-0x000000920000 : "depr"
[21474537.500000] 0x000000920000-0x000000960000 : "identity-ext2"
[21474537.505000] 0x000000960000-0x000010000000 : "rootfs"
[21474537.515000] initialised ok
[21474537.530000] usbcore: registered new interface driver libusual
[21474537.545000] s3c2440-usbgadget s3c2440-usbgadget: S3C2440: increasing FIFO to 128 bytes
[21474537.545000] gta02_udc_command S3C2410_UDC_P_DISABLE
[21474537.550000] mice: PS/2 mouse device common for all mice
[21474537.565000] i2c /dev entries driver
[21474537.575000] s3c2440-i2c s3c2440-i2c: slave address 0x10
[21474537.575000] s3c2440-i2c s3c2440-i2c: bus frequency set to 97 KHz
[21474537.600000] pcf50633 0-0073: Probed device version 19 variant 132
[21474537.655000] input: PCF50633 PMU events as /devices/virtual/input/input0
[21474537.700000] pcf50633-rtc pcf50633-rtc: rtc core: registered pcf50633-rtc as rtc0
[21474537.720000] regulator: auto: 3300 mV normal
[21474537.725000] regulator: down1: 1300 <--> 1600 mV normal
[21474537.740000] regulator: down2: 1800 mV normal
[21474537.755000] regulator: ldo1: 3300 mV normal
[21474537.770000] regulator: ldo2: 3300 mV normal
[21474537.785000] regulator: ldo3: 3000 mV normal
[21474537.800000] regulator: ldo4: 3200 mV normal
[21474537.800000] neo1973-pm-bt neo1973-pm-bt.0: FIC Neo1973 Bluetooth Power Management: starting
[21474537.810000] neo1973-pm-bt neo1973-pm-bt.0: __gta02_pm_bt_toggle_radio 1
[21474537.855000] regulator: ldo5: 3000 mV normal
[21474537.855000] neo1973-pm-gps neo1973-pm-gps.0: starting
[21474537.880000] regulator: ldo6: 3000 mV normal
[21474537.885000] regulator: hcldo: 2000 <--> 3300 mV normal
[21474537.895000] Detected S-Media IRQ# pullup, enabling interrupt
[21474537.895000] glamo3362 glamo3362.0: Glamo interrupt registered
[21474537.935000] glamo3362 glamo3362.0: Glamo core PLL1: 49119232Hz, PLL2: 89980928Hz
[21474537.945000] SMEDIA Glamo frame buffer driver (C) 2007 Openmoko, Inc.
[21474538.090000] Console: switching to colour frame buffer device 80x58
[21474538.160000] fb0: SMedia Glamo frame buffer device
[21474538.505000] Generic Backlight Driver Initialized.
[21474538.505000] glamo-mci glamo-mci.0: glamo_mci driver (C)2007 Openmoko, Inc
[21474538.505000] glamo-mci glamo-mci.0: probe: mapped mci_base:c88ee400 irq:0.
[21474538.510000] glamo-mci glamo-mci.0: glamo_mci_set_ios: power down.
[21474538.510000] glamo-mci glamo-mci.0: initialisation done.
[21474538.515000] regulator: memldo: 1800 mV normal
[21474538.515000] wake enabled for irq 53
[21474538.520000] s3c2440-ts s3c2440-ts: Starting
[21474538.520000] s3c2440-ts s3c2440-ts: Created Group filter len:12 coords:2 close:10 thresh:6
[21474538.520000] s3c2440-ts s3c2440-ts: Created Median filter len:20 coords:2 dec_threshold:24
[21474538.520000] s3c2440-ts s3c2440-ts: Created Mean filter len:4 coords:2
[21474538.520000] s3c2440-ts s3c2440-ts: Created Linear filter coords:2
[21474538.520000] s3c2440-ts s3c2440-ts: 4 filter(s) initialized
[21474538.520000] s3c2440-ts s3c2440-ts: Successfully loaded
[21474538.525000] input: s3c2410 TouchScreen as /devices/virtual/input/input1
[21474538.540000] glamo-mci glamo-mci.0: powered (vdd = 20) clk: 0kHz div=255 (req: 0kHz). Bus width=0
[21474538.550000] SD power -> 3200mV
[21474538.550000] glamo-mci glamo-mci.0: powered (vdd = 20) clk: 195kHz div=255 (req: 195kHz). Bus width=0
[21474538.550000] glamo-mci glamo-mci.0: powered (vdd = 20) clk: 195kHz div=255 (req: 195kHz). Bus width=0
[21474538.555000] glamo-mci glamo-mci.0: powered (vdd = 20) clk: 195kHz div=255 (req: 195kHz). Bus width=0
[21474538.555000] glamo-mci glamo-mci.0: Error after cmd: 0x8120
[21474538.555000] glamo-mci glamo-mci.0: Error after cmd: 0x120
[21474538.555000] glamo-mci glamo-mci.0: Error after cmd: 0x8120
[21474538.555000] glamo-mci glamo-mci.0: Error after cmd: 0x120
[21474538.565000] SD power -> 2700mV
[21474538.565000] glamo-mci glamo-mci.0: powered (vdd = 15) clk: 195kHz div=255 (req: 195kHz). Bus width=0
[21474538.565000] glamo-mci glamo-mci.0: powered (vdd = 15) clk: 195kHz div=255 (req: 195kHz). Bus width=0
[21474538.565000] glamo-mci glamo-mci.0: powered (vdd = 15) clk: 195kHz div=255 (req: 195kHz). Bus width=0
[21474538.580000] glamo-mci glamo-mci.0: powered (vdd = 15) clk: 195kHz div=255 (req: 195kHz). Bus width=0
[21474538.585000] glamo-mci glamo-mci.0: powered (vdd = 15) clk: 16666kHz div=2 (req: 16666kHz). Bus width=0
[21474538.585000] glamo-mci glamo-mci.0: powered (vdd = 15) clk: 16666kHz div=2 (req: 16666kHz). Bus width=2
[21474538.585000] mmc0: new SD card at address e624
[21474538.600000] neo1973-pm-host neo1973-pm-host.0: starting
[21474538.610000] input: lis302-1 (top) as /devices/virtual/input/input2
[21474538.635000] lis302dl spi3.0: Found lis302-1 (top)
[21474538.640000] input: lis302-2 (bottom) as /devices/virtual/input/input3
[21474538.665000] lis302dl spi3.1: Found lis302-2 (bottom)
[21474538.670000] input: Neo1973 Buttons as /devices/platform/s3c2440-i2c/i2c-adapter/i2c-0/0-0073/neo1973-button.0/input/input4
[21474538.715000] wake enabled for irq 48
[21474538.715000] neo1973-resume neo1973-resume.0: starting
[21474538.725000] s3c2440-i2c s3c2440-i2c: i2c-0: S3C I2C adapter
[21474538.745000] APM Battery Driver
[21474538.775000] not changing prescaler of PWM 3, since it's shared with timer4 (clock tick)
[21474538.780000] bq27000-battery bq27000-battery.0: BQ27000 Battery Driver (C) 2008 Openmoko, Inc
[21474538.785000] cpuidle: using governor ladder
[21474538.785000] mmcblk0: mmc0:e624 SU512 483 MiB
[21474538.790000] mmcblk0: p1
[21474539.220000] Registered led device: neo1973:vibrator
[21474539.225000] Registered led device: gta02-power:orange
[21474539.230000] Registered led device: gta02-power:blue
[21474539.230000] Registered led device: gta02-aux:red
[21474539.280000] usbcore: registered new interface driver usbhid
[21474539.280000] usbhid: v2.6:USB HID core driver
[21474539.290000] TCP cubic registered
[21474539.290000] NET: Registered protocol family 17
[21474539.295000] Bridge firewalling registered
[21474539.325000] pcf50633-rtc pcf50633-rtc: setting system clock to 2010-01-18 15:52:01 UTC (1263829921)
[21474543.170000] VFS: Mounted root (jffs2 filesystem) readonly on device 31:6.
[21474543.170000] Freeing init memory: 144K
[21474554.330000] S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics
[21474554.505000] s3c2410-wdt s3c2410-wdt: watchdog inactive, reset disabled, irq enabled
[21474557.540000] s3c2440-sdi s3c2440-sdi: host detect has no irq available
[21474557.540000] mapped channel 0 to 0
[21474557.990000] s3c2440-sdi s3c2440-sdi: powered down.
[21474557.990000] s3c2440-sdi s3c2440-sdi: initialisation done.
[21474557.990000] s3c2440-sdi s3c2440-sdi: running at 0kHz (requested: 0kHz).
[21474557.990000] s3c2440-sdi s3c2440-sdi: running at 196kHz (requested: 195kHz).
[21474557.995000] s3c2440-sdi s3c2440-sdi: running at 196kHz (requested: 195kHz).
[21474557.995000] s3c2440-sdi s3c2440-sdi: running at 196kHz (requested: 195kHz).
[21474558.000000] s3c2440-sdi s3c2440-sdi: running at 196kHz (requested: 195kHz).
[21474558.020000] s3c2440-sdi s3c2440-sdi: running at 196kHz (requested: 195kHz).
[21474558.030000] mmc1: queuing CIS tuple 0x01 length 3
[21474558.050000] mmc1: queuing CIS tuple 0x1a length 5
[21474558.065000] mmc1: queuing CIS tuple 0x1b length 8
[21474558.065000] s3c2440-sdi s3c2440-sdi: running at 25000kHz (requested: 25000kHz).
[21474558.065000] s3c2440-sdi s3c2440-sdi: running at 25000kHz (requested: 25000kHz).
[21474558.070000] mmc1: queuing CIS tuple 0x80 length 1
[21474558.070000] mmc1: queuing CIS tuple 0x81 length 1
[21474558.070000] mmc1: queuing CIS tuple 0x82 length 1
[21474558.070000] mmc1: new SDIO card at address 0001
[21474584.030000] HIFInit
[21474585.060000] BMI Get Target Info: Exit (ver: 0x20000059 type: 0x1)
[21474585.120000] AR6000 Reg Code = 0x40000060
[21474587.275000] FAT: bogus number of reserved sectors
[21474587.275000] VFS: Can't find a valid FAT filesystem on dev mmcblk0.
[21474591.120000] usb0: MAC 00:1f:11:01:0f:d8
[21474591.120000] usb0: HOST MAC 00:1f:11:01:0f:d9
[21474591.120000] g_ether gadget: Ethernet Gadget, version: Memorial Day 2008
[21474591.120000] g_ether gadget: g_ether ready
[21474591.605000] Bluetooth: Core ver 2.14
[21474591.605000] NET: Registered protocol family 31
[21474591.605000] Bluetooth: HCI device and connection manager initialized
[21474591.610000] Bluetooth: HCI socket layer initialized
[21474591.795000] Bluetooth: L2CAP ver 2.11
[21474591.795000] Bluetooth: L2CAP socket layer initialized
[21474591.925000] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[21474592.785000] NET: Registered protocol family 10
[21474593.015000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[21474593.020000] s3c-ohci s3c-ohci: S3C24XX OHCI
[21474593.045000] s3c-ohci s3c-ohci: new USB bus registered, assigned bus number 1
[21474593.045000] s3c-ohci s3c-ohci: irq 42, io mem 0x49000000
[21474593.105000] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[21474593.105000] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[21474593.105000] usb usb1: Product: S3C24XX OHCI
[21474593.105000] usb usb1: Manufacturer: Linux 2.6.29-rc3 ohci_hcd
[21474593.105000] usb usb1: SerialNumber: s3c24xx
[21474593.105000] usb usb1: configuration #1 chosen from 1 choice
[21474593.110000] hub 1-0:1.0: USB hub found
[21474593.110000] hub 1-0:1.0: 2 ports detected
[21474593.480000] usb 1-1: new full speed USB device using s3c-ohci and address 2
[21474593.735000] usb 1-1: New USB device found, idVendor=0a12, idProduct=0001
[21474593.735000] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[21474593.735000] usb 1-1: configuration #1 chosen from 1 choice
[21474594.075000] PPP generic driver version 2.4.2
[21474594.760000] Bluetooth: RFCOMM socket layer initialized
[21474594.760000] Bluetooth: RFCOMM TTY layer initialized
[21474594.760000] Bluetooth: RFCOMM ver 1.10
[21474594.845000] Bluetooth: Generic Bluetooth USB driver ver 0.4
[21474594.845000] usbcore: registered new interface driver btusb
[21474595.760000] No device for DAI s3c24xx-i2s
[21474595.930000] No device for DAI Bluetooth
[21474595.995000] asoc: WM8753 HiFi <-> s3c24xx-i2s mapping ok
[21474596.020000] asoc: WM8753 Voice <-> Bluetooth mapping ok
[21474596.035000] sound/soc/soc-dapm.c:349 mixer name 'Playback Mixer Voice Capture Switch' truncated to 31 characters.
[21474596.035000] sound/soc/soc-dapm.c:349 mixer name 'Playback Mixer Left Capture Switch' truncated to 31 characters.
[21474596.035000] sound/soc/soc-dapm.c:349 mixer name 'Playback Mixer Right Capture Switch' truncated to 31 characters.
[21474596.035000] sound/soc/soc-dapm.c:349 mixer name 'Mono Mixer Right Playback Switch' truncated to 31 characters.
[21474596.035000] sound/soc/soc-dapm.c:349 mixer name 'Mono Mixer Voice Playback Switch' truncated to 31 characters.
[21474596.035000] sound/soc/soc-dapm.c:349 mixer name 'Mono Mixer Sidetone Playback Switch' truncated to 31 characters.
[21474596.035000] sound/soc/soc-dapm.c:349 mixer name 'Mono Mixer Bypass Playback Switch' truncated to 31 characters.
[21474596.035000] sound/soc/soc-dapm.c:349 mixer name 'Right Mixer Voice Playback Switch' truncated to 31 characters.
[21474596.035000] sound/soc/soc-dapm.c:349 mixer name 'Right Mixer Sidetone Playback Switch' truncated to 31 characters.
[21474596.035000] sound/soc/soc-dapm.c:349 mixer name 'Right Mixer Right Playback Switch' truncated to 31 characters.
[21474596.035000] sound/soc/soc-dapm.c:349 mixer name 'Right Mixer Bypass Playback Switch' truncated to 31 characters.
[21474596.035000] sound/soc/soc-dapm.c:349 mixer name 'Left Mixer Voice Playback Switch' truncated to 31 characters.
[21474596.035000] sound/soc/soc-dapm.c:349 mixer name 'Left Mixer Sidetone Playback Switch' truncated to 31 characters.
[21474596.035000] sound/soc/soc-dapm.c:349 mixer name 'Left Mixer Bypass Playback Switch' truncated to 31 characters.
[21474600.100000] ADDRCONF(NETDEV_UP): usb0: link is not ready
[21474622.625000] eth0: no IPv6 routers present
[21474630.265000] neo1973-pm-bt neo1973-pm-bt.0: __gta02_pm_bt_toggle_radio 0
[21474630.290000] usb 1-1: USB disconnect, address 2
[21474630.300000] neo1973-pm-bt neo1973-pm-bt.0: __gta02_pm_bt_toggle_radio 0
[21474630.345000] s3c2410: changing usb to device
[21474630.880000] mmc1: card 0001 removed
[21474630.955000] ar6000_wow interrupt
[21474631.085000] s3c2440-sdi s3c2440-sdi: powered down.
[21474631.085000] s3c2440-sdi s3c2440-sdi: powered down.
[21474686.605000] keyboard.c: can't emulate rawmode for keycode 169
[21474686.800000] keyboard.c: can't emulate rawmode for keycode 169
[21474689.270000] gta02_udc_command S3C2410_UDC_P_ENABLE
[21474689.400000] g_ether gadget: full speed config #1: CDC Ethernet (ECM)
[21474689.430000] ADDRCONF(NETDEV_CHANGE): usb0: link becomes ready
[21474691.985000] pcf50633 0-0073: usb curlim to 500 mA
[21474697.995000] modem wakeup interrupt
[21474700.305000] usb0: no IPv6 routers present
[21474702.595000] rxerr: port=0 ch=0x00, rxs=0x0000000c
[21474702.595000] rxerr: port=0 ch=0x00, rxs=0x0000000c
[21474810.070000] keyboard.c: can't emulate rawmode for keycode 169
[21474810.225000] keyboard.c: can't emulate rawmode for keycode 169
[ 55.560000] rxerr: port=0 ch=0x00, rxs=0x0000000c
[ 104.660000] keyboard.c: can't emulate rawmode for keycode 169
[ 104.810000] keyboard.c: can't emulate rawmode for keycode 169
[ 121.615000] rxerr: port=1 ch=0x00, rxs=0x0000000d
[ 121.640000] rxerr: port=1 ch=0x00, rxs=0x0000000c
[ 150.495000] rxerr: port=1 ch=0x00, rxs=0x0000000c
[ 330.800000] keyboard.c: can't emulate rawmode for keycode 169
[ 330.960000] keyboard.c: can't emulate rawmode for keycode 169
[ 338.920000] rxerr: port=1 ch=0x00, rxs=0x0000000c
[ 385.480000] keyboard.c: can't emulate rawmode for keycode 169
[ 385.695000] keyboard.c: can't emulate rawmode for keycode 169
[ 395.725000] glamo-mci glamo-mci.0: command timeout, continuing
[ 398.635000] rxerr: port=1 ch=0x00, rxs=0x0000000c
[ 406.740000] rxerr: port=1 ch=0x00, rxs=0x0000000c
[ 745.035000] keyboard.c: can't emulate rawmode for keycode 169
[ 745.270000] keyboard.c: can't emulate rawmode for keycode 169
[ 1511.655000] glamo-mci glamo-mci.0: command timeout, continuing
[ 3319.375000] rxerr: port=1 ch=0x00, rxs=0x0000000c
_______________________________________________
Shr-User mailing list
[email protected]
http://lists.shr-project.org/mailman/listinfo/shr-user
