I haven't checked whether this is possible, but it would make usage really easy if it can be done. A setting to allow bluetooth gps capability would advertise the serial port when bluetooth is enabled, but the GPS would only be requested when another device connected to the bluetooth. That way gps is available if required whenever bluetooth is switched on, but not actually using power unless something is using it. You just need to turn bluetooth on and off through Quick Settings, rather than looking for the app or digging into the settings each time. The setting that controls this should be available under both the gps and bluetooth areas of the settings app as both are logical places for a user to look.
On Friday 04 February 2011, piratebab wrote: > I prefer a separate simple UI rather than using setting. It must be > possible to activate it with 2 "clicks". > > Le 02/02/2011 21:19, Neil Jerram a écrit : > > Having got bluetooth GPS relaying working, I was wondering how it could > > be most neatly integrated into SHR. > > > > I don't think it needs a dedicated full-screen application, as BtGPS > > currently is. I think it could be just a switch in the GPS module of > > > > shr-settings: > > Enable Bluetooth relay: Off / On > > > > Behind the switch would be equivalent code to what is currently in BtGPS > > - but with a much simpler UI. > > > > Thoughts on that? If the consensus is in favour of this, I'll work on > > the code for it. > > > > Regards, > > > > Neil _______________________________________________ Shr-User mailing list [email protected] http://lists.shr-project.org/mailman/listinfo/shr-user
