I experienced much the same thing except mine has a slight yellow to it
now. The cloudiness MIGHT be due to very small oxygen bubbles being
released when the silver reduces. Or larger silver particles, which
should be found on the bottom after they have settled out if that is the
cause.
Marshall
poast wrote:
Hello Steve,
Original color was clear, upon adding the ascorbic acid the solution turned
cloudy but the color was still clear, after a few days most of the
cloudiness cleared up and it is still clear in color. The tyndall effect is
much stronger after adding the ascorbic acid.
Tom
----- Original Message -----
From: "Norton, Steve" <stephen.nor...@ngc.com>
To: <silver-list@eskimo.com>
Sent: Wednesday, March 17, 2010 7:58 AM
Subject: RE: CS>Making 100% colloidal EIS
Tom,
What was the color of your solution before and after adding ascorbic
acid? Did the color change after the precipitated occurred?
Thanks,
Steve N
-
--
The Silver List is a moderated forum for discussing Colloidal Silver.
Rules and Instructions: http://www.silverlist.org
Unsubscribe:
<mailto:silver-list-requ...@eskimo.com?subject=unsubscribe>
Archives:
http://www.mail-archive.com/silver-list@eskimo.com/maillist.html
Off-Topic discussions: <mailto:silver-off-topic-l...@eskimo.com>
List Owner: Mike Devour <mailto:mdev...@eskimo.com>
