OK -- there's your problem.  *Fast* mode isn't necessary, and may be 
contradictory to making a good brew.  Leave your Colloid Master set on 
standard.  You don't have to figure out how to change the polarity of the 
electrodes -- the machine does that automatically.  And no -- I could not scrub 
the jars out with soap and water -- soap can add a film that can be hard to 
remove, and could contaminate your brew for awhile.  You've got a good start 
cleaning the interior of your jar by making four batches and cleaning it with 
clean paper towels.

Since you now have a quart of pretty good CS, I'd use that for SenSee -- rather 
than the original batches.  Since you used fast mode, you have created 
large-particle CS.  Won't kill her, but won't be as effective getting to the 
protozoa.  I'd save it for topical use instead.
MA
P.S.  You got a Hanna Tester, didn't you?  Did you test your batches to 
determine ppm-level?  



>
>From: Costumes [email protected]
>
>
>So I could go ahead and give that water (w particles on bottom of jar) to 
>SenSee, my EPM horse ??  I would want to filter it for her, however !!  
>
>The first 3 quarts (from the same gallon of DW) had the silver particles on 
>the 
>bottom, and they did look to me like they'd fallen off the electrodes ... I 
>had 
>it set at 4, and I also had the generator set to "fast" mode.  
>
> 
>When I did the 4th quart (from that same gallon of DW) I set it on 3, and also 
>put it on "standard" speed -- and that 4th quart did not have the large 
>particles ... but it did have what looked like fine silver "dust" on the 
>bottom, 
>but only a small amount about a half inch in diameter on the bottom of the 
>jar.  
>The water is "steamed" ... which Don was asking about ... and I still have to 
>figure out how to change the polarity of the electrodes ... Will try to work 
>that out with my next gallon of DW ....   Im also going to try cleaning the 
>electrodes w paper towel, which might not do as much damage to the surface of 
>the electrodes -- meaning that such large particles would be less likely to 
>sheer off .... Oh, and will try cleaning the jars like you said ... I had not 
>cleaned them.  So you would not scrub the jars out w soap and water ????
>