Re: CS>bacteria Ode Coyote Mon, 07 May 2012 04:13:10 -0700
> I've gone as high as 87 uS...but it went deep yellow in a few days > and eventually dropped back to 30 uS. > PPM unknown, but well over 87. > 25 to 30 uS is easy, but not generally very stable staying > colorless...depends on the water mostly. > Ode Ken, 87uS down to 30uS is a 65% drop. That is the worst case of contamination I have seen so far. I have seen a 60% drop, but you have it beat by a mile. I will use your post as a reference from now on to show how bad it can get. The big question is where is it coming from. If it were sulfide, the cs would be deep amber. So it has to be something else. One guess might be interactions from the hematite stirrer. This material has many crevices that can contain anything. I don't know what else could be causing the contamination, but one of the first things I will do when I get the SilverCell assembly instructions posted will be to fire up the Silverpuppy I bought from you, document the circuit in LTspice, modify it so I can take measurements, and start running brews to find out what is going on. I will of course post all the information I come across. Thanks, Mike Monett -- The Silver List is a moderated forum for discussing Colloidal Silver. Rules and Instructions: http://www.silverlist.org Unsubscribe: <mailto:[email protected]?subject=unsubscribe> Archives: http://www.mail-archive.com/[email protected]/maillist.html Off-Topic discussions: <mailto:[email protected]> List Owner: Mike Devour <mailto:[email protected]>
