Can't help you there, I only use a 38ohm resistor with an LED in circuit. For 250-300ml using two electrode unit it takes me about an hour to get between 15-20uS using Comm 100 meter and after perhaps 3-5 days stabilising comes back to around 10-15uS? With a 4 electrode/2 loop setup, 1200ml takes me around 2 hours to reach similar. I don't work on a specific ppm, that's impossible, a 'range' is what I work on. N.
Date: Fri, 11 Oct 2013 12:25:32 -0400 From: joe.hu...@primus.ca To: silver-list@eskimo.com Subject: Re: CS>thumb eczema Okay, that sounds like something *you* could do. :-) I might try that. I don't have my EIS maker set up yet. I have a LM334Z that will limit current if I can find a 68 ohm resistor. I am so slow. Of course, I golf a lot. If I am using 1 ma in a 1500 ml glass jar at 30 v, how long do I run it to get optimum quality EIS? Is there a test to see how good it is? If I just let it run for 24 hours or 2 days, is that a problem? Joe On 11/10/2013 5:36 AM, Neville Munn wrote: I can only