Hi There Dee I think it depends upon the composition of the water - the study of water is very complex and very interesting, which is why I told you years ago that you needed to find distilled water with a “0" reading on the TDS meter, this was one of the first things I learned about making good quality colloidal silver. Your distiller is obviously a very good one, mine does not give me a reading of “0” all the time, so I am aware of the different compositions which the so called distilled water I purchase has, which sometimes causes me to have to do a double or triple distillation to get to as near a “0” reading as is possible. Of course you can make colloidal silver with a less clean water, however for me to do a distillation is not a problem as I do it over night, and then use it first thing in the morning sometimes it is still warm which of course enhances the process of making the colloidal silver by cutting down the time to get whatever reading you choose to have for your brew, mine I stop at 10 and then it settles over time in storage to 5 !!!! For my gel I run the process up to 20 and make the gel immediately to disallow for settle !!!!! The tricks of the trade. Take good care and have a wonderful day in that not too bad today weather over your side !!!! Regards Sandee🐬 Attitude is everything !!! Sandra George Colloidal Silver Products Eye Drops & Topical Gel aliveagai...@yahoo.com
On 20 Feb 2015, at 11:49, Dee <d...@deetroy.org> wrote: Why do you have to triple distill sol! We have very hard water here and I just distill once. The water consistently reads '0' on my meter (cheap from Amazon) when distilled whereas it read over 300 before distilling....Dee Sent from my iPad > On 20 Feb 2015, at 14:47, sol <sol...@sweetwaterhsa.com> wrote: > > I have cleaned my SG-6 brew jar (gallon) and installed brand new electrodes. > I don't remember you mentioning if cleaning with peroxide is ok? Well rinsed > afterward with DW, wiped dry with clean paper towelling. > Electrodes wiped with paper towelling wetted with DW. > > The DW reads 1.7 uS on my PWT. Not 0.3 unfortunately, but the best I have at > the moment. > > I have set the generator to the lowest setting, and plan to check tyndal when > it shuts off. > From there I will decide whether to stop at that point and check uS or raise > the setting a bit and check again and so on to see how the tyndal changes, > and whether I have sparklies at any point. > > I don't expect to get a 10 uS product with no or faint tyndal and no > sparklies but I should get a much better product, right? > > I no longer have a distiller, so 0.3uS distilled water isn't going to be > available, and to be honest, I don't see me ever getting another distiller > and double or triple distilling to get the water down to that level. Just > can't manage it anymore. > > what do you think? > sol > > --- > This email has been checked for viruses by Avast antivirus software. > http://www.avast.com > > > -- > The Silver List is a moderated forum for discussing Colloidal Silver. > Rules and Instructions: http://www.silverlist.org > > Unsubscribe: > <mailto:silver-list-requ...@eskimo.com?subject=unsubscribe> > Archives: http://www.mail-archive.com/silver-list@eskimo.com/maillist.html > > Off-Topic discussions: <mailto:silver-off-topic-l...@eskimo.com> > List Owner: Mike Devour <mailto:mdev...@eskimo.com> > > ____________________________________________________________ Exclusive IPO Reports The Must-Own Stock for The Future of Social Media http://thirdpartyoffers.juno.com/TGL3165/54e758a369a9758a37570mp10vuc
