Hi Ron
Good to hear from you on CS.
I am new to the CS and I would like to know from your
experience :
1.- Do you use any starter to produce your cs other than
a mixture from the previous batch ?
2.- Do you know the strength of your CS in either PPM or microSiemens ?
3.- Do you notice a decrease in PPM or Microsiemens 24 hours
after production ?
I normally read 0.15 MA with distilled water at the start and heated
I read around 0.25 to 0.35 MA.
It is interesting to hear that you see T. E. at around 6 MA. Many
CS producers recommend to use a limiting current of 0.8MA
to produce cs. Does that mean that T. E. is not present with that
kind of low current ?
>From what I read, apprarently, low current is better to produce
small particles. It seems to take longer to prduce CS with a low
current and this is probably why we do get yellow CS.
I would appreciat your comments pls. Thanks for the info.
Gaston
===============================================
----- Message d'origine -----
De : Ron Hackley <[email protected]>
À : Silver List <[email protected]>
Envoyé : 2 avril, 2000 02:05
Objet : CS>Intro
> Hi List,
>
> I guess I've been lurking long enough and it's time for an intro. My
> name is Ron and I live near Glide Oregon. My wife and I have been using
> CS for several years now, as have the six feral cats (all neutered) that
> we cater to. No colds or the like since we began. We drink 4-6oz a day,
> sometimes more if we've been in town, and I usually slather it all over
> my hands and face before heading out into public places and when I see
> C-trails above. I've been scratched and bitten plenty by the cats while
> getting them used to me/people, and CS has been the only treatment I've
> used. Cat scratches usually heal so fast I forget they happened, and I
> haven't had any problems with infection. My wife has lived with dry eye
> syndrome for a long time and she says that her eyes haven't been as dry
> since using the CS internally for a while. Else, it gets sprayed on
> plants, used with cut flowers, as an underarm spray, mixed with MSM as a
> mist to inhale, used as a swallowable mouthwash, etc. My periodontist is
> having a tough time figuring out why the gum pockets around my teeth are
> actually becoming less deep instead of just remaining the same or
> getting deeper (he doesn't believe in CS, but does believe in fluoride
> and aspartame, and chastises me for believing "everything" I read on the
> internet:).
>
> My generator is homemade, and always open for improving and
> experimenting. 12v into a Newport voltage converter that gives 30v out.
> Anode is a 1oz silver round (.999 coin) and cathode is 1/8" stainless
> welding rod about 6" long. Both are silver soldered to banana plugs
> which makes cleaning and experimenting a lot easier. Banana jacks are on
> the bottom of a plastic box that sits on top of a large glass. Stirring
> is done using one of those long motors salvaged from an old Walkman
> tape unit. Power to it is resistered down so it turns maybe 250 rpm, not
> fast enough to agitate the water. The stirrer itself; the shaft is the
> needle (with actual needle snipped off) and sheath from a hypodermic,
> like used for insulin or B-12. This is a good press fit over the pulley
> on the end of the motor. The blades are quite small, fabricated with
> scissors from a leftover plastic window blind. I plan on adding current
> limiting, and maybe a cathode with a larger surface.
>
> To make CS I heat store bought distilled water in the microwave (yeah, I
> know!) to about 180 or so. I mix it with a bit of the previous batch,
> check the starting current (usually about 1ma), then let it go for about
> an hour and a half, wiping the cathode occasionally, and testing for the
> T.E. When I begin to get a slight T.E. I check the current; around 6ma
> has seemed about the right amount for me. I lift the electrodes out
> while they are still energized (this *seems* to help keep some of the
> slag attached to the cathode rather than releasing it back into the
> solution). The CS is then poured through a filter into a large amber
> beer bottle. The filter is just multiple coffee filters set in a funnel
> and I know I need to find something better, but it works for now. My CS
> has always been clear; I have tried to make yellow CS just to see what
> everyone means and it just doesn't happen for me. I haven't picked up
> any of the measuring devices yet (eh, got an ammeter) so I've been
> mostly judging the strength by taste.
>
> I've also got a Beck bioelectrifier (whatever), homemade, and just
> recently built the magnetic pulser (550uf, yet my washer only jumps a
> few inches, but you can sure reverse the polarity of a compass fast with
> it!). No results to report with either yet.
>
> I've certainly learned a lot about a lot of things since joining this
> list, and I hope to contribute some back in the future. What I get a
> kick out of is all of the people who are here to learn about CS and end
> up also learning something about electricity, electronics, water
> chemistry, the politics of medicine, and so many other subjects that are
> loosely related. Mike, thanks for a great job with the list, and to the
> various experts here, thanks for all of the information and ideas.
>
> Ron KC7ZWA
>
>
> --
> The silver-list is a moderated forum for discussion of colloidal silver.
>
> To join or quit silver-list or silver-digest send an e-mail message to:
> [email protected] -or- [email protected]
> with the word subscribe or unsubscribe in the SUBJECT line.
>
> To post, address your message to: [email protected]
> Silver-list archive: http://escribe.com/health/thesilverlist/index.html
> List maintainer: Mike Devour <[email protected]>
>