## An odd little experiment. I got to wondering what would happen if i ran a generator on pure h2o2 hydrogen peroxide. When i submerged used rods into the h2o2 they instantly started releasing bubbles even before applying power. I dipped a new silver rod into h2o2 and it didn't bubble...another old one did. The h2o2 ate up all the black stuff that was trapped in the pitted surface of the old silver rod and cleaned it quite effectively.
Going back to the generator. I had to disable the voltage referencing circuit because the h2o2 was too conductive telling my generator to turn off. Running at a regulated current of .8 ma. It violently bubbled on both rods for a few minutes [oxygen release??]then one rod started producing twice as many bubbles as the other [normal hydrolysis??]...no black stuff yet...no color at all...got a fine strong T.E. very quickly. [not present in the h2o2] After 40 minutes: One rod darkening a little and still bubbling half as much as the other, the other emmitting violent bubbles appearing white. Still no color...fine T.E., no sparkles, no deposits. Note: When hydrogen peroxide is depleted, distilled water is all that's left. Could be a great way to start a batch of CS? [Add a little hydrogen peroxide to the distilled water] That's next. It certainly cleans the rods! [even with no power] Gotta try it on a REALLY black rod and see what happens to the h202. KD'C/ k...@czen -- The silver-list is a moderated forum for discussion of colloidal silver. To join or quit silver-list or silver-digest send an e-mail message to: [email protected] -or- [email protected] with the word subscribe or unsubscribe in the SUBJECT line. To post, address your message to: [email protected] Silver-list archive: http://escribe.com/health/thesilverlist/index.html List maintainer: Mike Devour <[email protected]>
