A great deal of information is found on this technique in The Formation of Colloids by The Svedberg, published by D. Van Nostrand Company 25, Park Place NY, 1921.
Marshall [email protected] wrote: > In a message dated 00-06-05 23:41:46 EDT, you write: > > << Subj: CS>Re:HVAC-LVDC > Date: 00-06-05 23:41:46 EDT > From: [email protected] (Fred) > Reply-to: [email protected] > To: [email protected] > > Roger, have you found the Holy Grail? Is sputtering 25+ times more effecient > ("output increases by at least two orders of magnitude") then the relatively > loss less LVDC process? You and others often refer to "sputtering", the > definition which I know, (as in vacuum metalization) is the vaporization of a > metal (atoms, not ions?). Are you not then producing with sputtering a fine > suspension of silver particles? > > Fred: Yes, you are partially correct. I believe what happens during > sputtering is that the tip of the electrode becomes superheated well beyond > the melting point of silver, producing a significant silver vapor pressure > (At times I can see bubbles immerge from the surface of the molten silver > sphere at the electrode tip.) Then the fast moving ionized plasma collide > with the gaseous silver imparting a strong static charge as the silver atoms > are rapidly quenched into the water bath below so silver oxide is not formed > since (according to Ivan, and thermodynamics -- two equally reputable > sources) it is not stable above 150 degrees C. > > Current density, in a real process, is rarely the wetted surface area but > usually the projected surface area with maybe a 10-20% adder for fringe > effects. > > Sounds about right Fred. I seem to have forgotten some of the finer points. > Well, electrometallurgy was my minor anyway. > > As to the smaller particle size with the HVAC process, the LVDC process > releases > ions and they seem to come in only one size! What is your reference to HVAC > making smaller particles? > > Well, Bruce Marx and David Ripley both claim to have SEM studies which show > that their HVAC CS particles are smaller then CONVENTIONALLY produced LVDC > CS. However, the type of LVDC CS produced by some "silver listers" (< 1 ma > max, with stirring in ONLY DW) could be quite a bit smaller in particle size > and distribution, I simply don't know. Secondly, if the mechanism above is > more or less correct, SPUTTERED HVAC CS should have a very small particle > size. > > Roger > > -- > The silver-list is a moderated forum for discussion of colloidal silver. > > To join or quit silver-list or silver-digest send an e-mail message to: > [email protected] -or- [email protected] > with the word subscribe or unsubscribe in the SUBJECT line. > > To post, address your message to: [email protected] > Silver-list archive: http://escribe.com/health/thesilverlist/index.html > List maintainer: Mike Devour <[email protected]>

