Hi Robert and others also interested in 'energising' water,
Firstly, I recommend a couple of books that will certainly improve your
understanding of water:
Living Energies by Callum Coats
Sensitive Chaos by Theodore Schwenk
Second, here is an cheap and easy way of making your own 'energised' water
that you can try at home prior to generating some CS, or even just for
drinking. The principles involved are vortical movement of the water,
magnetism, and entrainment, which all sounds a bit fancy for what is quite
simple in practice.
Get two drink bottles, 2 litres (1 quart) in size. Use the type that are
round and smooth from the body to the neck, not ribbed or oddly shaped.
You are after ones that will produce a clean vortex of water. The
easiest, and safest, would be plastic ones but the pursts may want to use
glass later on. Clean the bottles thoroughly to remove any traces of
their previous contents. Using unflavoured mineral or soda water bottles
makes this easier.
Glue the flat tops of their lids together, so that when the bottles are
reattached one will be standing upside down above the other. Drill a 1 cm
(3/8") hole through the centre of the glued lids. This seems a reasonable
size although some may wish to play with different diameters.
Glue two, or perhaps four, moderately strong bar magnets about 2 cm (3/4")
below the neck of one of the bottles. Position them equidistant from each
other (opposite sides for two, compass points for four) and like poles
facing down (and up) the bottle length. I don't think it matters whether
it is north or south facing down, as long as they are all similar.
The third part is optional but I consider it important. Obtain some
high-energy water from whatever source you can, which could be from an
alternative energy store or over the internet. An example, and probably
not the best available, would be Grander Blue water. You don't need very
much so just buy a small amount. If you have choices, buy the very best
you can. If it is true high-energy water, it will keep this energy for a
very long time.
Fill two or more very small glass bottles with the high-energy water.
Make sure the bottles are clean and pure prior to filling. The idea here
is to attach the bottles to the outside of the lids, so judge how many
you will need to fit. They cannot be too big or else they would
interfere with screwing the lids back on the bottles. Tape or glue the
bottles securely. Ideally you would try to surround the lid with water,
so the engineering types may try a donut-type arrangement. You can use
copper for the container but don't use any metal that can be magnetised.
To actually 'energise' the water, 3/4 fill the non-magnet bottle with
distilled water (if you're using it for CS) or good quality filtered water
(if its for drinking). Screw on the double lid and screw the inverted
magnet bottle into the top. Flip the bottles over and move the base of
the top bottle in a circular motion a few times to initiate a vortex in
the water (a narrow tornado shape). Its worth the effort just to watch
this a few times - I find it fascinating.
When completely drained, flip the bottles over once more and repeat the
action, this time going from the magnet to the non-magnet bottle. Voila,
your water has been 'energised'. Transfer it to another container or
simply cap with a different lid.
If anyone tries this, please let the group know any results.
Namaste
Mike Fuller
"/When unseen things become obvious, you can't go backwards into ignorance/"
Kryon
--
The silver-list is a moderated forum for discussion of colloidal silver.
To join or quit silver-list or silver-digest send an e-mail message to:
silver-list-requ...@eskimo.com -or- silver-digest-requ...@eskimo.com
with the word subscribe or unsubscribe in the SUBJECT line.
To post, address your message to: silver-list@eskimo.com
Silver-list archive: http://escribe.com/health/thesilverlist/index.html
List maintainer: Mike Devour <mdev...@eskimo.com>
