Hi Marshall,

On Wed, 22 Nov 2000 00:24:00 -0500, Marshall Dudley
<[email protected]> wrote:

>> [email protected]> wrote:
>>
>> Very enlightening, but would any of this apply to 'wall warts', which
>> never have a 3rd prong?  --Russ
>
>Absolutely, that is what is so beautiful about them.  They use a transformer
>to monitor the current in each half of the circuit, and buck the two
>currents.  The difference current is pulled off with a 3rd winding, and goes
>to an electronic circuit that triggers when the imbalance is more than some
>amount, 2 to 5 mA or so.  

Are you sure?  I'm going to have to test some.  The GFI's 20 years ago
didn't seem to do that (that's the last time I tested them).

>See http://www.misterfixit.com/gfi.htm for more information:

Two coils, huh?  I thought it was 2 resistors in a bridge.  :)

However, I don't think a GFI would solve the problem described for
wall-warts.  If, somehow (and don't ask me how), a wall-wart put out
120 v on the hot terminal and 0 volts on the other, the GFI should
measure the same current through both sides of it's sensor -- unless
you happened to touch a grounded object (or are standing in a puddle).

-- Dean -- from (almost) Duh Moyn  (CDP, KB0ZDF)


--
The silver-list is a moderated forum for discussion of colloidal silver.

To join or quit silver-list or silver-digest send an e-mail message to: 
[email protected]  -or-  [email protected]
with the word subscribe or unsubscribe in the SUBJECT line.

To post, address your message to: [email protected]
Silver-list archive: http://escribe.com/health/thesilverlist/index.html
List maintainer: Mike Devour <[email protected]>