Kehoe;

WELCOME TO THE CKUB!!!!!!  I take it you have avoided the harrange going on
between Frank,Marshall, Roger, and Stephen.

Quite frankly NO ONE knows for sure which is best. Take people like Marsha and
Spiroflex who have cured lyme disease with constant voltage CS that has both
ionic and particles.  Many others using constant current CS have rported cures,
and it is mostly ionic.

Frank swears that ionic gets tied up with chlorine ions in the blood to make
silver chloride, and he is pushing particles.

Dr. Jon Brooks M. D. is doing some invivo (live beings) testing in mice to try
and answer what happens in the blood.

I know that my HVAC ARC in CO2 makes almost pure ionic silver. Frank reports
that his sub-arc is all particles. I cannot
duplicate that, yet. So I don't know if that is possible or not.

What causes argyria is silver in the form of compounds especially silver
nitrate. That is bad news stuff. They are many who have used cs for up to about
elven years and have had no problems.

So, I thought I would develop this new process so that I can move which ever
way is best and that may be a mixture.

I hope this asnwers your question.

"Ole Bob:"


Kehoe wrote:

> Please forgive me if I sound ignorant, but this has been bothering me for
> quite some time.  I was under the impression that it was "particle" silver
> that caused agryia and that is why we were using ionic silver.  Please tell
> me where my thinking might have gone wrong.
>
> CK
> ----- Original Message -----
> From: "Robert L. Berger" <[email protected]>
> To: "Silver-list" <[email protected]>
> Sent: Monday, April 09, 2001 2:26 PM
> Subject: CS>submerged arc CS Report #1
>
> > Hi Ya'all,
> >
> > This is the forst of a series of reports detailing my adventure with
> > submerged arc CS.
> >
> > It is a "strange animal."
> >
> > I have made two runs and a third is in progress now.
> >
> > Ihave made a floating electrode assembly similiar to Bill Fernald's, but
> > question is that is necessary for silver as things havppen very fast,
> > and there is no evaporation of water. With gold that is another story
> > which will not be looked at for awhile.
> >
> > The first batch was one gallon with equal sized electrodes using 12 kv
> > but it didin't work to well. Arc sustain problems. It looked like
> > regular HVAC ARC CS but had a bright red T.E. with no sparklies.
> >
> > Batch #2 used one #14 and 0ne #18 silver with 6 liters of 0.22 uS/cc DW.
> > In 40 minutes I had a CS with a turpidity and color as Frank show on his
> > web site. The Spect reading was 5.17 ppm ionic with a conductance of
> > 10.0 uS/cc.  After 24 hours the conductance was 7.7 uS/cc and the ionic
> > ppm was 2.42.
> >
> > To test for particle content I placed 50 cc of CS in a test tube and add
> > 5 cc of 35% H2O2. After several hours this was tested with the spec and
> > found an adjusted ppm for dilution with H2O2 to be 12.7 ppm.
> >
> > I quess this says that sub-arc CS is 16% ionic and 84% particle.
> >
> > I find it most interesting that both the ppm and conductance dropped
> > overnight.
> >
> > Comments. Please,
> >
> > "Ole Bob"
> >
> >
> > --
> > The silver-list is a moderated forum for discussion of colloidal silver.
> >
> > To join or quit silver-list or silver-digest send an e-mail message to:
> > [email protected]  -or-  [email protected]
> > with the word subscribe or unsubscribe in the SUBJECT line.
> >
> > To post, address your message to: [email protected]
> > Silver-list archive: http://escribe.com/health/thesilverlist/index.html
> > List maintainer: Mike Devour <[email protected]>
> >
> >