Just slipping a piece of #14 PVC wire insulation [house wire/romex] over the shaft does a fine job of making a stirrer. Ken
At 07:19 PM 6/7/01 +0000, you wrote: >Hi from Joe: > >Have in my hand the $1 Radio Shack motor. It has >a .225" long shaft with .077" diameter. Have considered >hiring a machine shop to build a shaft extension from a >1/4" S.S. bolt - drill to size & tap a setscrew hole, >shaft hole must be concentric. Do any of you know of >a source for an extension of maybe 2" with or without an >impeller? > >Have ordered a transformer w 5.0 V secondary. Label >says it likes .9 amps at full load which should make >8300 RPM. What's cheap & works ok for a speed control? > >Thanks. Bye? > > >-- >The silver-list is a moderated forum for discussion of colloidal silver. > >To join or quit silver-list or silver-digest send an e-mail message to: >silver-list-requ...@eskimo.com -or- silver-digest-requ...@eskimo.com >with the word subscribe or unsubscribe in the SUBJECT line. > >To post, address your message to: silver-list@eskimo.com >Silver-list archive: http://escribe.com/health/thesilverlist/index.html >List maintainer: Mike Devour <mdev...@eskimo.com> > >