Hi Satchid,

you do not make CG with DC. You need an AC arc underwater.

You can tell CG by its color. It starts out a very pale lavender and increase
to red with ppm.

With a NST you do not need to measure the current (besides it is very difficult
to due at 12 kv) It will run the full capacity of the NST wither 30 ma or 60
ma.

Don't diddle around with DC and low current. It is a waste of time.

Go to WWW.colloidal gold.com andsee what others have done. WE all make CG that
way or slightly modified.

"Ole Bob"


Satchid wrote:

> I tried today (probably still with the right transformers to make colloidal
> gold. I could not get good result. the one transformer is to low voltage
> (4500 V 100 ma) the other is 8000V 50 Ma.
> I decided to try the low voltage way again but not that low. So, I took a
> Diode bridge and connected the AC side directly to the main 240v then I
> connected the positive to the gold electrode the negative to a silver
> electrode. At first I had current but it stayed almost stable. Then It
> started slowly to go up from 1.35 ma and it is now already at 9 ma and this
> after about 45 minutes. For this I used no current limiting.
> Do you think that I have colloidal Gold?
>
> Thank You
>
> Satchid
>
> --
> The silver-list is a moderated forum for discussion of colloidal silver.
>
> To join or quit silver-list or silver-digest send an e-mail message to:
> [email protected]  -or-  [email protected]
> with the word subscribe or unsubscribe in the SUBJECT line.
>
> To post, address your message to: [email protected]
> Silver-list archive: http://escribe.com/health/thesilverlist/index.html
> List maintainer: Mike Devour <[email protected]>