Bob,

I did not receive direct emails concerning CG. But I give you whatever I
know, this is not much. because I made only on batch of CG. I think the
electrode setup of Ole Bob Is wonderful. I did not tried it but will soon
do.

The only thing to do is to put the electrodes in position connect something
above 8000 Volts on the electrodes and get them make a continue spark. The
farther away the electrodes are from each other the lower the current. I do
not know that the current density (current per mm² of wetted electrode) is
of importance here. Cleaner water = better spark. Colder the water = better
spark. If you have to put the secondary windings of 2 neon transformers in
series to obtain the necessary voltage, then do not earth the case, also do
not let the 2 cases make electrical contact. It will indeed blow up one if
not the 2 transformers as someone said in a mail to me on the list.

The connections is simple from the terminals of the transformer to the
electrodes with special high tension wires. I think that you need at least
30 mA and 10000 V for convenient work. I worked with 12000 V and 50 mA.

The first negative observation is the heating up of the DW. I placed
therefore the glass DW container with the electrodes into a flat little
bathtub filled with water. this helps, but is not sufficient. Therefore I
intend to circulate the DW trough a condenser of a water distiller pumping
the water trough there where the steam normally would go, and then cold
water to cool it. therefore I do need info on what material is allowed in
CG. Is plastic or some plastic tubing a no or a yes. The type of tubing used
in hospitals ( you know the yellow very flexible ones) are they good? Are
there pumps that are good for this operation.

An other way of cooling could be ( and I think this is better ) is to put an
as long as possible spiral glass tube in the container with the DW and pump
cold water trough it.

There are wonderful explanations on HVAC setups for CS if you do a search on
"HVAC" on top of the list. however, the setup for silver is probably not
working for CG. Someone said the For CG you need a spark under water.

THIS ALL AD OF COURSE TO THE DANGER OF WORKING WITH HIGH TENSION. DO NOT
ELECTROCUTE YOURSELF.

I hope this can get you going.

-----Original Message-----
From: Bob Toews [mailto:[email protected]]
Sent: maandag 21 januari 2002 7:41
To: Satchid
Subject: Re: CS>CG


Hi Satchid,
I'm interested in making CG as well. 'Ole Bob' sent me his diagram of the
electrode. Could I impose on you to forward any other email you've received
on how to make CG?
Thanks in advance!
Bob.
----- Original Message -----
From: "Satchid" <[email protected]>
To: <[email protected]>
Sent: Saturday, January 19, 2002 6:10 PM
Subject: RE: CS>CG


--
The silver-list is a moderated forum for discussion of colloidal silver.

To join or quit silver-list or silver-digest send an e-mail message to: 
[email protected]  -or-  [email protected]
with the word subscribe or unsubscribe in the SUBJECT line.

To post, address your message to: [email protected]
Silver-list archive: http://escribe.com/health/thesilverlist/index.html
List maintainer: Mike Devour <[email protected]>