Yes, salts can be toxic; however, a theory I've had about other ionic compounds may apply here: If gold chloride naturally dissolves into an ionic solution in water, then the chloride might be separated out by means of a "water ionizer."
In 2000, the CS list had a thread about dietary minerals wherein Duncan initiated a sereis of posts titled, "It's the ionic form that really works." Simultaneously, a discussion was underway regarding a good calcium supplement. While various (expensive) brands were mentioned, I got the idea of buying CHEAP (50 lb. bags of) calcium & magnesium chloride, dissolving them in water and running that through a polarizer to achieve an aqueous solution of pure Ca+ and Mg+ (and OH-). Now those machines can be outrageously expensive, so I began musing over how I might build one. The platinum coated electrodes, which catalytically protect the (usually titanium) substrate against acidic corrosion, are the prime expense, so I was investigating alternatives (carbon rods, iridium compounds, conductive polymers) when more mundane concerns took precedence...but it still might be worth pursuing and pertinent to CG. Thoughts? --Russ ----- Original Message ----- From: Marshall Dudley <[email protected]> To: <[email protected]> Sent: Monday, January 21, 2002 9:21 AM Subject: Re: CS>colloidal gold. > I want to warn everyone that gold salts are reported to be quite toxic I > believe. So be careful that you have NO salts left. > > (I have not verified this information, it came from a doctor discussing gold > shots for people who have arthritis) > > Marshall > > Kevin Nolan wrote: > > > Thanks again Ivan. Any thoughts on the best reagents to precipitate gold as > > colloid, concentrations to use etc? Looks like we're homing in on something > > here - possibly that thing at the end of the rainbow! > > > > regards, Kevin Nolan > > > > ----- Original Message ----- > > From: "I Anderson" <[email protected]> > > To: <[email protected]> > > Sent: Monday, January 21, 2002 8:06 PM > > Subject: RE: CS>colloidal gold. > > > > > Kevin, > > > > > > Yes quite cost effective. 1g of gold chloride will make 49L of 10ppm > > > colloidal gold. > > > > > > In Australia you can obtain supplies here: > > > > > > http://www.proscitech.com.au/ > > > > > > ProSciTech > > > PO Box 111 > > > Thuringowa Qld 4817 > > > Australia > > > > > > Street Address: > > > 37 Framara Dr, Kelso, 4815 > > > > > > C106 Gold Chloride AU$58.00 1g 10% discount for 10 x 1g > > > > > > GOLD CHLORIDE hydrate > > > H(AuCl4) :H2O. F.W. 229.79 > > > Chloroauric acid; hydrogen tetrachloroaurate; gold trichloride, acid. > > > Assay 99.9985%. Gold content 49%+. > > > Used in histology for staining of nerves. This highly purified gold > > > compound may be used for the preparation of colloidal gold sols. > > > Golden-yellow to reddish, highly hygroscopic, crystals. Deteriorates > > > readily in UV light, is caustic on skin, dissolves well in water and > > > alcohol. M.S.D.S > > > C106 Gold Chloride, 1g (ampoule) Price > > > > > > > -----Original Message----- > > > > From: Kevin Nolan [mailto:[email protected]] > > > > Sent: Monday, 21 January 2002 2:50 a.m. > > > > To: [email protected] > > > > Subject: Re: CS>colloidal gold. > > > > > > > > > > > > Thanks, Ivan. So where does one purchase gold chloride, and > > > > is it economic > > > > compared with electrolytically making from gold wire or similar? > > > > > > > > regards, Kevin Nolan > > > > > > > > ----- Original Message ----- > > > > From: "I Anderson" <[email protected]> > > > > To: <[email protected]> > > > > Sent: Sunday, January 20, 2002 11:28 AM > > > > Subject: RE: CS>colloidal gold. > > > > > > > > > > > > > Yes Kevin, > > > > > > > > > > But then why go to the trouble of electrically generating ionic > > > gold > > > > > when one can purchase soluble gold chloride. > > > > > > > > > > Chemical reduction of gold chloride by various compounds > > > > (tannic acid, > > > > > sodium citrate, etc.) as you mention is the traditional way > > > > of making > > > > > commercial and batch quantities of CG, as used in large > > > > amounts by the > > > > > bio-chemistry industry. With the ability to regulate a uniform > > > > > particle size from about 6nm +, it would seem to be the way to go. > > > > > > > > > > Regards > > > > > Ivan. > > > > > > > > > -- > > > The silver-list is a moderated forum for discussion of colloidal silver. > > > > > > To join or quit silver-list or silver-digest send an e-mail message to: > > > [email protected] -or- [email protected] > > > with the word subscribe or unsubscribe in the SUBJECT line. > > > > > > To post, address your message to: [email protected] > > > Silver-list archive: http://escribe.com/health/thesilverlist/index.html > > > List maintainer: Mike Devour <[email protected]> > > > >

