How could an arc be created by LV?  Arcing requires exceeding the medium's
breakdown voltage.  Jump-starting the process with CG might reduce the V
requirement (which might still be high) IF you had CG at the outset...?

--Russ


> Has any one thought of LVDC or LVAC arcing under water ...why does it
> need to be HV?
>
> Ivan
>
> > -----Original Message-----
> > From: Russ Rosser [mailto:[email protected]]
> > Sent: Wednesday, 23 January 2002 4:30 a.m.
> > To: [email protected]
> > Subject: Re: CS>colloidal gold.
> >
> >
> > Yes, salts can be toxic; however, a theory I've had about other
> ionic
> > compounds may apply here:  If gold chloride naturally
> > dissolves into an
> > ionic solution in water, then the chloride might be separated
> > out by means
> > of a "water ionizer."
> >
> > In 2000, the CS list had a thread about dietary minerals
> > wherein Duncan
> > initiated a sereis of posts titled, "It's the ionic form that
> > really works."
> > Simultaneously, a discussion was underway regarding a good calcium
> > supplement.  While various (expensive) brands were mentioned,
> > I got the idea
> > of buying CHEAP (50 lb. bags of) calcium & magnesium
> > chloride, dissolving
> > them in water and running that through a polarizer to achieve
> > an aqueous
> > solution of pure Ca+ and Mg+ (and OH-).
> >
> > Now those machines can be outrageously expensive, so I began
> > musing over how
> > I might build one.  The platinum coated electrodes, which
> > catalytically
> > protect the (usually titanium) substrate against acidic
> > corrosion, are the
> > prime expense, so I was investigating alternatives (carbon
> > rods, iridium
> > compounds, conductive polymers) when more mundane concerns took
> > precedence...but it still might be worth pursuing and pertinent to
> CG.
> > Thoughts?
> >
> > --Russ
> >
> > ----- Original Message -----
> > From: Marshall Dudley <[email protected]>
> > To: <[email protected]>
> > Sent: Monday, January 21, 2002 9:21 AM
> > Subject: Re: CS>colloidal gold.
> >
> >
> > > I want to warn everyone that gold salts are reported to be
> > quite toxic I
> > > believe.  So be careful that you have NO salts left.
> > >
> > > (I have not verified this information, it came from a
> > doctor discussing
> > gold
> > > shots for people who have arthritis)
> > >
> > > Marshall
> > >
> > > Kevin Nolan wrote:
> > >
> > > > Thanks again Ivan. Any thoughts on the best reagents to
> > precipitate gold
> > as
> > > > colloid, concentrations to use etc? Looks like we're homing in
> on
> > something
> > > > here - possibly that thing at the end of the rainbow!
> > > >
> > > > regards, Kevin Nolan
> > > >
> > > > ----- Original Message -----
> > > > From: "I Anderson" <[email protected]>
> > > > To: <[email protected]>
> > > > Sent: Monday, January 21, 2002 8:06 PM
> > > > Subject: RE: CS>colloidal gold.
> > > >
> > > > > Kevin,
> > > > >
> > > > > Yes quite cost effective. 1g of gold chloride will make
> > 49L of 10ppm
> > > > > colloidal gold.
> > > > >
> > > > > In Australia you can obtain supplies here:
> > > > >
> > > > > http://www.proscitech.com.au/
> > > > >
> > > > > ProSciTech
> > > > > PO Box 111
> > > > > Thuringowa Qld 4817
> > > > > Australia
> > > > >
> > > > > Street Address:
> > > > > 37 Framara Dr, Kelso, 4815
> > > > >
> > > > > C106 Gold Chloride AU$58.00 1g 10% discount for 10 x 1g
> > > > >
> > > > > GOLD CHLORIDE hydrate
> > > > > H(AuCl4) :H2O. F.W. 229.79
> > > > > Chloroauric acid; hydrogen tetrachloroaurate; gold
> > trichloride, acid.
> > > > > Assay 99.9985%. Gold content 49%+.
> > > > > Used in histology for staining of nerves. This highly
> > purified gold
> > > > > compound may be used for the preparation of colloidal gold
> sols.
> > > > > Golden-yellow to reddish, highly hygroscopic, crystals.
> > Deteriorates
> > > > > readily in UV light, is caustic on skin, dissolves well
> > in water and
> > > > > alcohol. M.S.D.S
> > > > > C106 Gold Chloride, 1g (ampoule) Price
> > > > >
> > > > > > -----Original Message-----
> > > > > > From: Kevin Nolan [mailto:[email protected]]
> > > > > > Sent: Monday, 21 January 2002 2:50 a.m.
> > > > > > To: [email protected]
> > > > > > Subject: Re: CS>colloidal gold.
> > > > > >
> > > > > >
> > > > > > Thanks, Ivan. So where does one purchase gold chloride, and
> > > > > > is it economic
> > > > > > compared with electrolytically making from gold wire
> > or similar?
> > > > > >
> > > > > > regards, Kevin Nolan
> > > > > >
> > > > > > ----- Original Message -----
> > > > > > From: "I Anderson" <[email protected]>
> > > > > > To: <[email protected]>
> > > > > > Sent: Sunday, January 20, 2002 11:28 AM
> > > > > > Subject: RE: CS>colloidal gold.
> > > > > >
> > > > > >
> > > > > > > Yes Kevin,
> > > > > > >
> > > > > > > But then why go to the trouble of electrically
> > generating ionic
> > > > > gold
> > > > > > > when one can purchase soluble gold chloride.
> > > > > > >
> > > > > > > Chemical reduction of gold chloride by various compounds
> > > > > > (tannic acid,
> > > > > > > sodium citrate, etc.) as you mention is the traditional
> way
> > > > > > of making
> > > > > > > commercial and batch quantities of CG, as used in large
> > > > > > amounts by the
> > > > > > > bio-chemistry industry. With the ability to
> > regulate a uniform
> > > > > > > particle size from about 6nm +, it would seem to be
> > the way to go.
> > > > > > >
> > > > > > > Regards
> > > > > > > Ivan.
> > > > >
> > > > >
> > > > > --
> > > > > The silver-list is a moderated forum for discussion of
> colloidal
> > silver.
> > > > >
> > > > > To join or quit silver-list or silver-digest send an
> > e-mail message
> > to:
> > > > > [email protected]  -or-
> > [email protected]
> > > > > with the word subscribe or unsubscribe in the SUBJECT line.
> > > > >
> > > > > To post, address your message to: [email protected]
> > > > > Silver-list archive:
> > http://escribe.com/health/thesilverlist/index.html
> > > > > List maintainer: Mike Devour <[email protected]>
> > > > >
> > >
> >
> >
>