Silver carbonate, and maybe silver hydroxide which spontanously converts to silver oxide. None of these are very soluble in cold water.
silver chloride 0.89 ppm silver carbonate 32 ppm silver oxide 13 ppm So, one limits their intake of silver chloride due to it's lack of solubility, but in the case of silver carbonate, one could get about 35 times as much. All 3 are light sensitive. So I don't think it would be a good idea. Marshall sol wrote: > So what do you get if you use baking soda? Don't some mfrs suggest using a > pinch of baking soda? > paula > > From: "Marshall Dudley" <mdud...@execonn.com> > To: <silver-list@eskimo.com> > > > Not if you use LVDC and distilled water, which is what most here are > using. > > You can get silver chloride if you use table salt as a starter, and you > can > > get either or both if you use tap or well or spring water. You can get > > silver nitrate if you use an HV method and strike an arc in an atmosphere > > that has nitrogen in it above the water. Arcs under the water should > still > > be ok though, or if the arc is surrounded by an inert gas. > > > > Marshall > > -- > The silver-list is a moderated forum for discussion of colloidal silver. > > Instructions for unsubscribing may be found at: http://silverlist.org > > To post, address your message to: silver-list@eskimo.com > > Silver-list archive: http://escribe.com/health/thesilverlist/index.html > > List maintainer: Mike Devour <mdev...@eskimo.com>
