url: http://escribe.com/health/thesilverlist/m63327.html
CS>Re: Measuring very high ppms
From: Jrowland
Date: Fri, 10 Oct 2003 00:33:13

  Hi jr,

  I'm beginning to see the problem. I'll try to answer  your questions
  in the shortest space  possible. Sympatico has instituted  new email
  procedures that make it unusable. It is too slow.

  >> ...I always use ppm calculated, or ppmc,

  > Yes.

  >> ...to indicate this is the highest possible ppm obtainable...

  > You may inherently know this, but I believe this is the first time
  > you have actually stated it.

  Sorry, I  thought  it was obvious. All my work has  been  focused on
  understanding ions  and oxides and how they  are  produced. Clearly,
  they have to come from somewhere.

  > What or  who's specific verification method  of  measurement would
  > satisfy you? You have consistently begged-off getting  any testing
  > done, citing "too many variables".

  You really  don't need to get a lab test. It is only a  snapshot and
  does not  show  daily variations due  to  temperature, contaminants,
  variations in  the  quality  of the dw, and  so  on.  Please  see my
  response to Stuff:

    http://escribe.com/health/thesilverlist/m63347.html

  I use  the  Faraday equations to time the brew, and stop  it  at the
  first sign  of  sludge or deposits on the anodes. If the  dw  is not
  acting up, the ppm will be a bit less than the calculated value.

  How much  less takes an educated guess. Most low current  density cs
  gives 95% ionic or more. Check Frank's reports, and some of the better
  data from Ken and Ivan.

  So for  a  calculated  value  of  22  ppmc,  I  subtract  10%  to be
  conservative and call it 20 ppm.

  If I have any questions about the process, I do a quick salt test to
  check. It quickly showed the discrepancy for two recent  dw problems
  I ran into.

  The Hanna PWT would be an excellent method if I could find  some way
  to guarantee  the calibration. Steve Young's idea to  make resistive
  standards might be an excellent solution.

  Most of  the time, I push the Godzilla generator to 34 ppmc  and use
  H2O2 to clear the yellow tint. I don't have any idea what the actual
  ppm is, but I'm sure it is above 20 and probably below 27 ppm.

  That's the hghest value Ivan and Ken have posted, and I don't want to
  go above it unless I have real good data.

  But it  is strong and highly repeatable. Repeatability  is  the most
  important thing about making cs. If it is not repeatable, you really
  can't tell  if it is doing the job, especially if you are  older and
  your immune system is degraded like the mold did to mine.

  >> ...It is so obvious, I can't see how anyone can think otherwise.

  > Pretend, just for a moment, you are a newbie to CS production.

  That never  really occurred to me. People are constantly  coming and
  going, and  there  is no way to guess how much  background  they may
  have. Most of the explanations on the web are of little use or plain
  wrong. I  have  no idea what preconceptions people  might  have, and
  can't do  much about it. I'm constantly learning more and  doing new
  experiments. They  already take too long to explain to  Ken  and the
  others. It  would  bore  them to death if I had  to  start  from the
  beginning in each post.

  >> Are we on the same page now?

  > We're getting there... jr

Best Regards,

Mike Monett


--
The silver-list is a moderated forum for discussion of colloidal silver.

Instructions for unsubscribing may be found at: http://silverlist.org

To post, address your message to: [email protected]

Silver-list archive: http://escribe.com/health/thesilverlist/index.html

List maintainer: Mike Devour <[email protected]>