When you use a good laser pointer to shine the beam through your colloidal silver a luminous pencil thin "beam" will appear. How bright this beam of light is will be dependant on how many true colloidal particles you have made. The beam is created by the light scattering properties of even the very smallest particles. The objective should be to achieve the brightest beam you can before the entire solution turns yellow, indicating that the average particle size has become larger than what we consider to be ideal. The "sparkles" that are being referred to are chunks of silver oxide that have been knocked off the cathode in one way or another. Being much larger than the colloidal particles, they will be brightly lit when passing through the laser beam. They will eventually fall out of suspension and find their way to the bottom. Best Regards, Arnold Beland www.atlasnova.com ----- Original Message ----- From: "d.linen" <li...@ev1.net> To: <silver-list@eskimo.com> Sent: Thursday, October 30, 2003 11:20 AM Subject: Re: CS>Sparkles
> OK..I thought you were "supposed" to see these when you make cs.... > if you shine a light through plain water you don't see anything, after > making cs..you see them... I thot someone mentioned that was one way to > check your cs... so I am confused.. > KIM > > > Thank you for asking. I've never understood this tindle thing. > > DL > > > -- > The silver-list is a moderated forum for discussion of colloidal silver. > > Instructions for unsubscribing may be found at: http://silverlist.org > > To post, address your message to: silver-list@eskimo.com > > Silver-list archive: http://escribe.com/health/thesilverlist/index.html > > List maintainer: Mike Devour <mdev...@eskimo.com> --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.529 / Virus Database: 324 - Release Date: 10/17/2003
