The timing of this inquiry couldn't have been better for me.  I just bought 
pressure treated landscape timbers for a retaining wall and to terrace an area 
for gardening.  After hauling part of the order home, I took time to read a 
brochure on their use. The list of handling and use recommendations have raised 
serious doubts about using them. 1. You should not burn the scrap. 2. Wear dust 
mask, goggles, & gloves when working with it. 3.After working with it wash 
exposed area thoroughly. 5. Wash work clothes separately immediately after use. 
6. Should not be used where it comes into direct or INDIRECT contact with 
drinking water. 7. Do not use under circumstances where it may become a 
compound of food, animal feed, or beehives. 
  What effect would spraying untreated  lumber with EIS  have on its useful 
life? 
 This issue coming up is an example of what makes this the best all around list 
on the internet.   Bob Smith
  







  ----- Original Message ----- 
  From: Charles Sutton 
  To: [email protected] 
  Sent: Sunday, June 06, 2004 9:04 PM
  Subject: CS>Wood Deck and Balcony


  Somewhere, sometime, following a link, I seem to remember that if you tread 
bare wood with silver, you won't need to have it pressure treated.  I have a 
deck that is just yellow pine and is a very nice gray color after about 3 years 
in the sun.  I like the color, but if I use the treatment recommended it turns 
back to the original gold wood color which I don't like.  What method of making 
silver would be best to use for spraying this decking for preserving it with 
silver?  Any suggestions would be appreciated.