when on sale at harbor freight, small voltmeter that does milliamps. put in line with your system. i use either arrowhead distilled or kmart distilled. at startup, readings are usuall about .22 ma and 25.7 vdc . i run it till i read about 1.35 - 1.40 ma and around 28.2vdc. the batch has an adequate tyndall effect, no sludge and remains clear with no sludge. stirred by aquarium bubbler. all done in a glass gallon jug.
jim ----- Original Message ----- From: "David Bearrow" <dav...@sbcglobal.net> To: <silver-list@eskimo.com> Sent: Friday, June 25, 2004 11:47 PM Subject: RE: CS> Useful current limit circuit > Hi Wayne, > > Why not spend the $50 and get yourself a conductance meter? > > Dave > > At 09:02 AM 6/25/04, you wrote: > I would like to point out the disadvantages of the constant > current. Using constant current, the LED will not serve as a visual > indicator of current flow which allows the rejection of inferior water. -- The Silver List is a moderated forum for discussing Colloidal Silver. Instructions for unsubscribing are posted at: http://silverlist.org To post, address your message to: silver-list@eskimo.com Silver List archive: http://escribe.com/health/thesilverlist/index.html Address Off-Topic messages to: silver-off-topic-l...@eskimo.com OT Archive: http://escribe.com/health/silverofftopiclist/index.html List maintainer: Mike Devour <mdev...@eskimo.com>