Re: CS>Ionic versus Colloidal
From: Marshall Dudley
Date: Tue, 29 Mar 2005 11:52:19
http://escribe.com/health/thesilverlist/m79146.html

P.S. This is a repost - sympatico went clang again. Sorry if it is a 
duplicate.

  > Dan Nave wrote:

  >> Re: CS>Ionic versus Colloidal

  >> From: Marshall Dudley wrote:
  >> Date: Mon, 28 Mar 2005 10:53:24

  >> "M. G. Devour" wrote:

  >>> So we  are  left with the unanswered  question  of  whether some
  >>> mechanism exists  by which silver chloride -- or  whatever other
  >>> as yet undetermined species might exist -- may form an effective
  >>> fraction in the complex environment of the blood.

  >> <YES YES YES YES!

  >> Why, then, do we not just use an appropriately small  and diluted
  >> dose of silver chloride instead of going through all  the trouble
  >> to make EIS?

  >> I had suggested this idea before but there was no comment...

  > Because that  can  give you argyria, and if I am  right  about the
  > conversion of  silver  salts  to silver  particles  in  the blood,
  > produce a  few  ineffective huge particles  of  silver  instead of
  > trillions of extremely small effective ones. With EIS you  get the
  > nucleation sites for plate out in the brew.

  > Marshall

  I am  amused  by the arguments produced  recently.  Silver  ions are
  converted to  silver  chloride  as soon as  they  encounter  salt or
  hydrochloric acid  in  the body. There is no  minimum  solubility as
  Marshall proposes. It all gets converted to silver chloride.

  We all  know  Stan Jones got Argyria from  drinking  large  doses of
  silver chloride. When exposed to light, a photon knocks  an electron
  free from the chlorine, and the silver ion grabs it. Both  atoms are
  now free to go their separate ways, but the silver gets stuck in the
  tissues and turns your skin blue. So silver chloride is  bad because
  it produces elemental silver particles in your body.

  But then  we  read  that   ionic   cs  will  not  give  you Argyria.
  Interesting. With all the cs we drink over the years, surely some of
  it must  have stuck somewhere and we are all turning blue.  But this
  contradiction is never resolved.

  The next thing we hear is Mesosilver is pure silver particles. Seems
  like we  just decided silver particles are bad since  they  give you
  Argyria. It  has  to  accumulate  over  time  -  the  EPA  and other
  organizations give maximum lifetime doses. But this contradiction is
  never resolved.

  Next we hear that Mesosilver is very effective in killing pathogens.
  It has to be true - the reports are publication quality.

  But the reports never tell us that the 20ppm Mesosilver has an ionic
  content of  3.9ppm. The reports also use a 75ppm version,  but there
  is no  information on the ionic content. There has to be some  - but
  we don't  know how much. So how do we know the  killing  results are
  not due  to  the ion content? The times  listed  are  certainly long
  enough for  silver  ions  to diffuse anywhere  and  slowly  kill the
  pathogen.

  The 75ppm product is not available commercially. Perhaps  the reason
  is it  definitely  would  produce  Argyria.  Is  it  fair  to  use a
  non-available product to demonstrate the efficiency of  the standard
  one? I don't think so.

  Next we hear that silver ions were never found in the blood, but the
  ICP/AES did find silver in the blood serum. Interesting.

  If you hold 1 oz of 20pm cs in your mouth for ten minutes, then spit
  it out, the maximum possible concentration you can get in your blood
  is 118 parts per billion. Of course, you never get 100% absorption.

  The silver  content mentioned in one of Frank's reports  ranges from
  28ppb to  a  bit over 100ppb. This corresponds well  with  the value
  calculated above.

  But we are supposed to believe the reason this could not be detected
  with the  Ion  Selective Voltmeter is because  it  all  converted to
  silver chloride,  which is bad or doesn't matter depending  on which
  page you are on.

  Perhaps the  reason  the  ion was not detected is  the  probe  has a
  minimum detection  level.  One commercially  available  probe  has a
  limit of  50 parts per billion - the same range as we are  trying to
  measure.

  The probe  is  also  affected by other  ions,  such  as  sodium. The
  selectivity coefficients differ for each probe and  ion combination.
  So it  is  possible the interference  from  sodium  would completely
  overwhelm the  response from the small amount of silver ions,  so it
  could not be detected.

  The owner  of  the instrument knows the  performance  data.  I asked
  Frank for these parameters, but have not seen a response:

    http://escribe.com/health/thesilverlist/m78996.html

  So it's  possible the attempt to measure the ion content  was futile
  in the first place. We are not given the information needed to tell.

  The next amazing thing we learn is the key to everything is particle
  surface area. There is no explanation - we just have to take this on
  faith.

  It turns  out  surface  area  is very  important  when  you  want to
  increase the rate of a reaction. For example, if you want an aspirin
  to dissolve  faster,  you break it into pieces.  This  increases the
  surface area  and it goes faster. Cookies bake faster than  a single
  large cake  because their surface area is greater.  There  are other
  methods of  increasing  the   reaction   rate.   You  can  raise the
  temperature. You can increase the concentration.

  Perhaps the most significant way of increasing the reaction  rate is
  to use  the correct ingredients. Marbles won't bake  in  cookies, no
  matter how small you make the particles.

  But surely the silver ion has to have the largest surface area.

  Similarly, all  the  previous information on  the  killing  power of
  silver refers to the action of the ions. The British Columbia report
  on environmental effect of silver shows the silver ion combines with
  a sulphur ion in the bacteria, killing it.

  We really don't know how silver ions kill bacteria and  viruses, but
  there are hundreds of protein pathways in bacteria.  Often disabling
  just one  will  kill it. There is a report on the  number  of silver
  ions needed  to kill one bacteria. I don't have the link  handy, but
  it may be something like 100,000. So we need lots of ions.

  Everything in  biology  works  with  ions.  There  are  no reactions
  involving neutral particles. But Frank doesn't tell us how  the pure
  silver particles in Mesosilver can have any biological effect.

  It could be related to the action of Silverlon bandages,  which have
  pure silver embedded in the fabric. But the description of Silverlon
  tells us the silver is converted to ions by body fluids  released in
  the wound,  and  it is essential to wet the  bandage  with distilled
  water to start the conversion.

  if this  is true, then Mesosilver could be converted to  silver ions
  in the body.

  However, we  now  have the problem that  silver  ions  are instantly
  converted to  silver chloride, and we have to start all over  at the
  beginning.

  My head explodes when I try to figure this out. Why bother  with all
  this hokey-pokey  when  I can make my own highly  ionic  silver, and
  watch it  heal  the  damage caused by years  of  problems  with mold
  toxins?

  There  are   many   other   examples   of   confusion,   errors, and
  contradictions, but  Mike has indicated he wants this thread  to end
  so I will quit now.

  On to more important things, like why does Trem's SG7 make such fine
  cs?

Best Wishes,

Mike Monett


--
The Silver List is a moderated forum for discussing Colloidal Silver.

Instructions for unsubscribing are posted at: http://silverlist.org

To post, address your message to: [email protected]
Silver List archive: http://escribe.com/health/thesilverlist/index.html

Address Off-Topic messages to: [email protected]
OT Archive: http://escribe.com/health/silverofftopiclist/index.html

List maintainer: Mike Devour <[email protected]>