Mike,

I think this is what you wanted to see. Please note the test result photos cannot be shown in plain text so you will have to go to the site for viewing. http://tinyurl.com/3qb4v

You might also want to take a look at this page also.
http://tinyurl.com/4jff2


Trem
______________________________________________
Natural-Immunogenics Documentation Library

Comparative Bacteriology Analysis:
Particulate vs. Ionic Silver
December 22, 2004
Andrew Martin, B.S.
John W. Roberts, Ph.D.
Natural-Immunogenics Corp

Purpose
Claims have been made by the manufacturer of Mesosilver that suggest "ionic" silver potency is compromised by Hydrochloric Acid (HCl) in the stomach, and that only particulate silver (i.e. Mesosilver) can be effective in inhibiting pathogenic microorganisms. The hypothesis of Natural-Immunogenics, Corp. is that, contrary to the claims above, only the ion is responsible for silver's antimicrobial efficacy. Natural-Immunogenics, Corp.'s products (Argentyn 23 and Sovereign Silver ) are composed in excess of 95% silver ions. The purpose of this study is to compare the antibacterial efficacy of Argentyn 23 Silver to that of Mesosilver . Both of these products were exposed to the same amount (concentration) of HCl. Identical bacterial concentrations and dilutions of two strains of Staphylococcus aureus (S-1 and S-2) were used to test each product. This testing was accomplished by exposing healthy strains of the bacteria (in dilution series) to the two products after adding 10µl of HCl solution (in various concentrations).

Materials and Methods

Summary:
The antibacterial activity of both Argentyn 23 and Mesosilver were compared by treating healthy cultures of the bacterial strains, separately, with each of the two products (to which was added 10µl of HCl solution, in various concentrations, to make 1 ml samples of each).
Source, cultivation, and preparation of bacterial samples:
The YT media was autoclaved and poured into sterile plates and allowed to dry.
Two strains of Staph received from the New York Hospital of Queens.
B14192 - wild type/ normal strain (S-1)
B14310 - antibiotic resistant MRSA (S-2)
The bacteria was grown on YT media for 16 to 24 hours before being harvested. A 3 mm confluent inoculum of S-1 was resuspended in 1,250µl of sterile, 17 to 18 MegOhm (M?) purified lab water. Then a standard 10:1 dilution series was performed on each strain, using sterile purified lab water 1/10, 1/100, 1/1,000, 1/10,000, and 1/100,000 dilutions of each stock bacterial suspension were prepared.
The bacterial strain, S-2, was prepared identically, as was strain S-1.

Preparation of Test Media (YT):
Each 95mm sterile polystyrene culture plate (Petri dish) was filled with 5mm of YT media (which consists of 0.5% NaCl, 0.6% yeast extract, 0.8% tryptone and 2% agar).
Preparation of the silver products:
Argentyn 23 was diluted to 20 PPM (so as to have an equal concentration of silver) using sterile, 18 MegOhm (M?) purified lab water. Mesosilver was determined (separately, by atomic absorption) to have a concentration of 20 PPM. 9 parts of Argentyn 23 (final concentration 18 PPM) and one part of HCl (33, or 44, or 77 PPM, finally diluted to 3, 4, and 7 PPM, respectively) were added to eachother and mixed.
Mesosilver and HCl were added to eachother and mixed, as above.

Treatment of Bacterial Strains with Silver Products
10 µl. of the silver product/ HCl mixture (9µl. each of Silver product and 1 µl. of HCl) were added to 90µl. of each of the sets of dilutions (1/100 through 100,000) of the two bacterial strain, above. The mixture was agitated and allowed to react until spotted onto the YT plate. One 10µl sample of each mixture of bacterial dilution/Silver/HCl of Strain S-1 was spotted onto the YT plates. One 10µl sample of each mixture of bacterial dilution with Silver/HCl of Strain S-2 was spotted onto YT plates. The exposure times were limited to 4 or 8 minutes, respectively, for each set of treatments.
This protocol was performed identically for Argentyn 23 and Mesosilver.
Negative control plate (positive growth) - No silver/HCl being added to S-1 or S-2 cultures. Sterile, purified water replaced the volume (10µl) of Silver/HCl.

Positive control plate - Treatment of bacterial strains with respective silver products without HCl.
Plates then placed in a 35°C to 37°C incubator overnight (16 to 24 hours).

Results
Qualitative results can easily be seen on each plate.
The negative control for S-1 grew out 4.5 spots, represented by (++++ ½ ), as did the negative control for S-2. These samples did not contain the silver or silver/ HCl mix. A (-) represents no Staph growth and (1/2) represents some Staph growth. The efficacy of the silver/HCl in the various ratios can be compared by the number of (+) vs. (-) spots observed. The positive control (silver and NO HCl) for S-1 and S-2. This should have shown the greatest degree of kill/inhibition (since there was no HCl to degrade/inactivate the silver. A + designation is given for complete or near-complete spot-growth. A ½ is given for mottled/speckled appearing growth. A ½ is given for only a few spots of growth. A - is given for NO growth. The right-most + or - character represents a 1/100,000 dilution of the stock bacterial suspension; the left-most + or - represents a 1/10 dilution. The more - characters from the right, the more potent the antibacterial activity. The negative control (representing NO silver/HCl treatment should show 4 + and one ½ characters, demonstrating the viability of the untreated bacterial employed.

Inhibition results
S-1 4min S-2 4min S-1 8min S-2 8min
Negativecontrol ++++ ½ ++++ ½ ++++ ½ ++++ ½
Argentyn23, 0 HCl - - - - - - - - - - - - - - - - - - - -
Ag23 w/ 3ppm HCl +/- - - - - +/- - - - - - - - - - ½ - - - -
Ag23 w/ 4ppm HCl + - - - - + - - - - + - - - - + - - - -
Ag23 w/ 7ppm HCl + - - - - + - - - - + - - - - + - - - -
Mesosilver, 0 HCl +½ ½ +/- - ++½ +/- - + ½ ½ - - + ½ ½ - -
Meso w/ 3ppm HCl +++½ +/- +++½ +/- ++ ½ ½ - ++++ ½
Meso w/ 4ppm HCl ++++ ½ ++++ ½ +++ ½ - ++++ ½
Meso w/ 7ppm HCl ++++ ½ ++++ ½ ++++ ½ ++++ ½

The photographs of the results for the 4 minute exposure of the Silver/HCl (at 3 PPM) are shown below. The observations of the 4 PPM and 7 PPM and for both 4 and 8 minute exposures of Silver/HCl mixtures were virtually identical to those for the illustrated 3 PPM HCl (shown below).

Discussion
The concentrations of HCl added to each of the two products were such that the concentrations of HCl in the final volumes would be 3ppm, 4ppm, and 7ppm. The range of concentration was determined in an earlier experiment. These concen-trations were selected because, if the HCl were to react with the silver, the conversion of Ag+ to AgCl would not make HCl the limiting reagent. The amount of remaining active silver would be the true limiting factor.

The following conclusions can be drawn from the data:
It is evident from the results that the antimicrobial efficacy of both products decreases as the concentration of HCl increases . When comparing the plates where no HCl was added, it can be seen that Argentyn 23T has far greater antibacterial efficacy than MesosilverT . Mesosilver'sT antibacterial efficacy is almost negated by adding just 4ppm of HCl, whereas Argentyn23T 's antibacterial efficacy is only slightly reduced but still strong, even with the addition of 7 PPM HCl. Adding HCl to the silver products, causes the chloride ion to bind the silver ion forming Silver chloride (AgCl). Since Argentyn23T is primarily an ionic product there is still a sufficient number of Ag+ ions left to kill the bacteria. MesosilverT on the other hand is primarily particulate in nature, and has significantly little (compared to Argentyn 23T ) silver ion content. Once the silver ions in MesosilverT react with the chloride ions, they become almost completely inactivated. We see an almost complete loss of antimicrobial activity when MesosilverT is exposed to even modest quantities of HCl.

This experiment serves as proof that it is the active, available silver ions - not the particulate silver - in which the antibacterial property of silver resides.



----- Original Message ----- From: "M. G. Devour" <[email protected]>
To: <[email protected]>
Sent: Wednesday, March 30, 2005 6:52 PM
Subject: Re: CS>Ionic versus Colloidal


Trem, please save me going to the site: Where and when is the microbe
introduced into the experiment. Diluted into the pure water before
addition of the other stuff?

So it's a go/no go test, basically, showing whether the product will
produce 100% kill within a certain period of time?

About the only difference would be if the mesosilver was given less
time than it needs to complete the kill, while the ionic material
happened to kill faster under the conditions. How much time are we
talking about?

Be well,

Mike D.

[Mike Devour, Citizen, Patriot, Libertarian]
[[email protected]                        ]
[Speaking only for myself...               ]


--
The Silver List is a moderated forum for discussing Colloidal Silver.

Instructions for unsubscribing are posted at: http://silverlist.org

To post, address your message to: [email protected]
Silver List archive: http://escribe.com/health/thesilverlist/index.html

Address Off-Topic messages to: [email protected]
OT Archive: http://escribe.com/health/silverofftopiclist/index.html

List maintainer: Mike Devour <[email protected]>