That aquarium is molded plastic, there is no silicone at all. Yes, I make it in the aquarium. I have made over 500 gallons in the last 6 months. I use a flow through as I have detailed before, with a flow through rate of 1 1/2 gallons an hour, with 80 mA of current reversed each minute, and 3 4X6 silver plates with an electrode area of approximately 100 square inches. It produces crystal clear 20 ppm CS.
Marshall Lea Ann wrote: > I hope this isn't too "dumb" of a question but do you make your CS in the > aquarium? If you don't... could you? I know there is silicon glue in > there. > > Blessings, > Lea Ann Savage > Satellite Beach, FL > 321-773-7088 > www.FreeFashionJewelry.com > We have two ears and one mouth - use them proportionately! > (I'm hoping that if it's in my signature line I'll heed the advice :-) > Philippians 4:8 > > ----- Original Message ----- > From: "Marshall Dudley" <mdud...@king-cart.com> > To: <silver-list@eskimo.com> > Sent: Monday, October 02, 2006 1:56 PM > Subject: Re: CS>Question about stirring mechanisms > > >I don't think so. I would have the pump pull from a tube at the bottom of > >the > > jar, and then simply dump the water out of the outlet tube into the top of > > the > > jar. I think the easiest way is to buy an aquarium kit for about $25, > > they you > > get the gallon tank, the stirring pump, and a light and cover. I use this > > one: > > > > http://www.petguys.com/pet-guys/-047431502860.html and can be purchased at > > probably any local pet store. > > > > I simply run it without the filter cartridge. > > > > Marshall > > -- > The Silver List is a moderated forum for discussing Colloidal Silver. > > Instructions for unsubscribing are posted at: http://silverlist.org > > To post, address your message to: silver-list@eskimo.com > > Address Off-Topic messages to: silver-off-topic-l...@eskimo.com > > The Silver List and Off Topic List archives are currently down... > > List maintainer: Mike Devour <mdev...@eskimo.com> >
