In RSTS/E, you have DZ11 lines, but they are configured for a CSR of 160100 and 160110, and vectors are 400 and 410. I bet that does not match what simh thinks...

  Johnny

On 2019-12-09 11:25, Trevor Warwick wrote:

I'm using "PDP-11 simulator V4.0-0 Current", and getting the same results on Win10 and Linux.

I'm booting the full RSTS V7.0-07 disk, built by by Chuck Cranor. This boots fine, and I can log in on the simulated console. However, I can't persuade it to recognise any additional terminals. If I use:

set dli enable
set dli lines=8
attach dli 10001

Then I get a telnet server appearing on port 10001, which prints "Connected to the PDP-11 simulator DLI device, line 0" when I boot the RSTS system disk. However, there's no response to any input once RSTS is up and running.  I've also tried using a DZ11

set dz lines=8
attach dz 10002

and in that case I don't even get the "Connected...." line from simh. RSTS can apparently see the hardware though:

RSTS V7.0-07 llama (DL0)


Option: HA

   HARDWR suboption? LI

   Name  Address Vector  Comments
   TT:    177560   060
   RK:    177400   220   RK05F units: none
   RL:    174400   160   Units: 0(RL01) 1(RL01) 2(RL01) 3(RL01)
   RM:    177440   210   Units: 0(RK06) 1(RK06) 2(RK06) 3(RK06) 4(RK06)
                                5(RK06) 6(RK06) 7(RK06)
   RR:    176700   254   BAE=+050, Units: 0(RM03) 1(RM03) 2(RM03)
                                3(RM03) 4(RM03) 5(RM03) 6(RM03) 7(RM03)
   TM:    172520   224
   PR0:   177550   070
   PP0:   177554   074
   LP0:   177514   200
   RX0:   177170   264
   KL0:   176500   300
   KL1:   176510   310
   KL2:   176520   320
   KL3:   176530   330
   KL4:   176540   340
   KL5:   176550   350
   KL6:   176560   360
   KL7:   176570   370
   DZ0:   160100   400
   DZ1:   160110   410

   KW11L  177546   100
   SR     177570
   DR     177570

   Hertz = 60.

   Other: FPU, SL, 22-Bit Addressing, Cache w/address, System ID = 4660

If I boot an RSX-11M disk, then additional terminal interfaces seem to work fine, so the problem seems specific to RSTS.   I saw references in the list archive to other pre-built systems on www.rsts.org <http://www.rsts.org> but that doesn't seem to be available at the moment, so I can't try another build right now.

Any clues on what I'm missing ?

Thanks,
Trevor



_______________________________________________
Simh mailing list
Simh@trailing-edge.com
http://mailman.trailing-edge.com/mailman/listinfo/simh


--
Johnny Billquist                  || "I'm on a bus
                                  ||  on a psychedelic trip
email: b...@softjar.se             ||  Reading murder books
pdp is alive!                     ||  tryin' to stay hip" - B. Idol
_______________________________________________
Simh mailing list
Simh@trailing-edge.com
http://mailman.trailing-edge.com/mailman/listinfo/simh

Reply via email to