Hello all: Hello all:
I am trying first to Address a routing issue with our IVR Platform in regard to sending calls through our ACME SBC. Since all calls are serviced through this appliance what "SIP" remote IP should we be sending the calls to? If we send the calls directly to the SBC we get hung up at the 100 and no 200 okay coming back to us. The Current solution in place is to call the remote sip ip which is the hammer g5 10.205.53.4 which the SBC recognized as a valid IP in its address tables to allow the call to proceed to the IVR platform. (in trying to simulate what our hammer appliance was/is doing currently). The following SIP ladder call flow is the request from the SIPp Load Generator towards the Hammer G5 then on to the IVR platform, this example we are just making a call to my desk phone. |Time | 172.20.2.242 (<-our SIPp load generator) | 10.205.53.12 | | | | 10.205.53.4(<-hammer remote IP) | |2.171 | INVITE SDP (g729 g711U g721 telephone-eventRTP...e-96) | |SIP From: <sip:sipp@172.20.2.242:5065 To:<sip:78168543543@10.205.53.4:5060 | |(5065) ------------------> (5060) | | |2.175 | 100 Trying| | |SIP Status | |(5065) <------------------ (5060) | | |2.833 | 183 Session Progress SDP (g729 telephone-event...Type-96) | |SIP Status | |(5065) <------------------ (5060) | | |2.833 | PRACK | | |SIP Request | |(5065) ------------------> (5060) | | |2.835 | 200 OK | | |SIP Status | |(5065) <------------------ (5060) | | |2.897 | RTP (g729) | |RTP Num packets:1202 Duration:24.019s SSRC:0x1650 | |(40000) <-------------------------------------- (21584) | |5.593 | 200 OK SDP (g729 telephone-eventRTPType-96) | |SIP Status | |(5065) <------------------ (5060) | | |5.593 | ACK | | |SIP Request | |(5065) ------------------> (5060) | | |10.608 | RTP (g729) | |RTP Num packets:817 Duration:16.326s SSRC:0x6328 | |(40000) --------------------------------------> (21584) | |26.934 | BYE | | |SIP Request | |(5065) <------------------ (5060) | | |26.936 | 200 OK | | |SIP Status | |(5065) ------------------> (5060) | | What I am trying to figure out is what the IP the SBC is not recognizing here if we send the call directly to the SBC from sipp@172.20.2.242:5065? Thanks John _______________________________________________ Sip-implementors mailing list Sip-implementors@lists.cs.columbia.edu https://lists.cs.columbia.edu/cucslists/listinfo/sip-implementors