The sip gateway piece near the end of the config is a tad different. I have some 5.x examples in the wiki... let me know if you need help with it.
From: Keith Gearty [mailto:ke...@glensound.co.uk] Sent: Thursday, August 27, 2009 9:24 AM To: Picher, Michael Cc: sipx-users@list.sipfoundry.org Subject: Re: [sipx-users] Getting Music On Hold (MoH) to work through aPattonSmartNode 4114 Sorry for the long delay. I seem to be running firmware version 4.2 (2007-09-19) on hardware version 4.4. I guess I'll have to risk doing a firmware upgrade to get the MoH working. Thanks for your help. Keith. Picher, Michael wrote: I meant firmware on the Patton... sorry for not clarifying... From: sipx-users-boun...@list.sipfoundry.org [mailto:sipx-users-boun...@list.sipfoundry.org] On Behalf Of Picher, Michael Sent: Friday, August 21, 2009 1:18 PM To: Keith Gearty; sipx-users@list.sipfoundry.org Subject: Re: [sipx-users] Getting Music On Hold (MoH) to work through aPattonSmartNode 4114 What version of Firmware are you running? I've found 5.2 and 5.3 work with MoH... Mike From: sipx-users-boun...@list.sipfoundry.org [mailto:sipx-users-boun...@list.sipfoundry.org] On Behalf Of Keith Gearty Sent: Friday, August 21, 2009 12:35 PM To: sipx-users@list.sipfoundry.org Subject: [sipx-users] Getting Music On Hold (MoH) to work through a PattonSmartNode 4114 Hi all I know I've asked something like this once before, but I didn't get a reply that helped me resolve the issue. I have a Patton SmartNode 4114 PSTN gateway with 4 FXO ports, and I would like to get Music on Hold working through it. My internal phones are Snom 320s, and they have a "Music on Hold Server" setting which the SipXecs auto-provisioning sets as "sip:~~...@domain". MoH seems to work fine for internal calls between the Snom 320s, but when a call coming through the Patton gateway is put on hold, all the far end hears is occasional beeping. I have been informed that the Patton doesn't have a "Music on Hold Server" setting, and that the MoH is supplied to it by the internal phone. If this is the case, surely it should all just work. What do I need to change/enable in the system to get this working? Thanks, Keith.
_______________________________________________ sipx-users mailing list sipx-users@list.sipfoundry.org List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
