Jim Canfield wrote:
On Thu, Aug 27, 2009 at 8:23 AM, Keith Gearty<ke...@glensound.co.uk> wrote:
I guess I'll have to risk doing a firmware upgrade to get the MoH working.
Thanks for your help.
You will have to rewrite the SIP portion of your config if you
upgrade. If you can wait a few days, I have a 4114 here in the office
I can setup and send you a 5.x config. Or, if you are up to it, all
the info you need is in this thread:
http://list.sipfoundry.org/archive/sipx-users/msg15588.html
It's for the 4960, don't worry about the ISDN side. The SIP side is
all the same. Be sure to backup your 4.x config just in case. I've
been meaning to do something useful with all my Patton notes.
-Jim
Thanks for your help. I spoke to my boss, and he'd rather I started on
a new project rather than tinkering with the MoH on our phone system any
more. But if you have some useful notes and examples on the Pattons, it
would be great to get those up on the wiki where everyone can benefit
from them.
Keith.
_______________________________________________
sipx-users mailing list sipx-users@list.sipfoundry.org
List Archive: http://list.sipfoundry.org/archive/sipx-users
Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users
sipXecs IP PBX -- http://www.sipfoundry.org/
