Right, internal phone to phone registered to the system from outside (through sipXbridge). Get this message. Happened to me on a separate system as well (my home test system, at which time I blew it away and installed 4.1.x).
Haven't tried via an alias. Dial plan is pretty simple so it doesn't seem to be anything there. I'll have to grab some traces as Scott suggested. Mike -----Original Message----- From: Tony Graziano [mailto:tgrazi...@myitdepartment.net] Sent: Wednesday, December 02, 2009 6:35 AM To: Picher, Michael; mra...@gmail.com Cc: sipx-users@list.sipfoundry.org Subject: Re: [sipx-users] sipxbridge Let me make sure I understand this. Local phone dials remote user: Local user 200 dials remote user 250 and you get this error message? Call the remote user (250) dial local user (200)? Can the local dial it via an alias? Cal external users dial it via DID or AA? ============================ Tony Graziano, Manager Telephone: 434.984.8430 Fax: 434.984.8431 Email: tgrazi...@myitdepartment.net LAN/Telephony/Security and Control Systems Helpdesk: Telephone: 434.984.8426 Fax: 434.984.8427 Helpdesk Contract Customers: http://www.myitdepartment.net/gethelp/ ----- Original Message ----- From: sipx-users-boun...@list.sipfoundry.org <sipx-users-boun...@list.sipfoundry.org> To: M. Ranganathan <mra...@gmail.com> Cc: sipx-users@list.sipfoundry.org <sipx-users@list.sipfoundry.org> Sent: Wed Dec 02 05:22:17 2009 Subject: Re: [sipx-users] sipxbridge Sorry... I tend to lump it all together. The remote phones are registered to 5060 and using sipxbridge-1 as SBC for NAT traversal. For some reason the PBX thinks when trying to call the externally registered phones back that it's trying to dial back out to an ITSP. Mike -----Original Message----- From: M. Ranganathan [mailto:mra...@gmail.com] Sent: Tuesday, December 01, 2009 10:39 PM To: Picher, Michael Cc: sipx-users@list.sipfoundry.org Subject: Re: [sipx-users] sipxbridge On Tue, Dec 1, 2009 at 9:43 PM, Picher, Michael <mpic...@cmctechgroup.com> wrote: > I'm having some trouble with sipXbridge and dialing out to users who are > registered through it. > You cannot register remote users through sipxbridge. ( sipxbridge registers to an ITSP - it is the Registration client never the registration server. ) Remote users are expected to register with the sipx registrar directly. Their phones should be sending REGISTER requests to port 5060 (and not port 5080 ) in other words. Regards Ranga > > > The system I'm working on is on version 4.0.4. > > > > I'm seeing this error: > > > > Message from sipXecs > Alarm: SPX00020 > Reported on: fqdn.of.sipx.pbx > Reported at: 2009-12-02T02:01:28.722934Z > Severity: CRIT > Alarm Text: An ITSP for the domain 'dest.ip.remoteuser.firewallextaddr' > could not be found. > Suggested Resolution: Check your Trunking Gateway configuration and ITSP > account. Make sure the Address of the Trunking Gateway matches the ITSP > account server domain name. > > _______________________________________________ > sipx-users mailing list sipx-users@list.sipfoundry.org > List Archive: http://list.sipfoundry.org/archive/sipx-users > Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users > sipXecs IP PBX -- http://www.sipfoundry.org/ > -- M. Ranganathan _______________________________________________ sipx-users mailing list sipx-users@list.sipfoundry.org List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/ _______________________________________________ sipx-users mailing list sipx-users@list.sipfoundry.org List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
