Because you are using multiple public ip's, you need to creat source rules too. ============================ Tony Graziano, Manager Telephone: 434.984.8430 Fax: 434.984.8431
Email: tgrazi...@myitdepartment.net LAN/Telephony/Security and Control Systems Helpdesk: Telephone: 434.984.8426 Fax: 434.984.8427 Helpdesk Contract Customers: http://www.myitdepartment.net/gethelp/ ----- Original Message ----- From: sipx-users-boun...@list.sipfoundry.org <sipx-users-boun...@list.sipfoundry.org> To: sipx-users <sipx-users@list.sipfoundry.org> Sent: Mon Feb 22 09:28:05 2010 Subject: [sipx-users] PfSense and Sipx...no inbound audio, or calls going through I reinstalled sipx since I replaced our subnet and firewall from endian to pfsense. With pfsense, I cannot get any incoming calls. From my cell, I don't hear anything when I try to dial my incoming DID number. Not even the operator IVR. I have setup Pfsense with my public IPs as virtual Proxy ARP IPs. Then I created 1:1 NAT and set outbound proxy to advance and remove the default entry that was created. For the firewall rules I have enabled the WAN side as well to listen for the following ports: 80, 21, 8443, 12000, 30000 to 31000. LAN Firewall rules I did not touch. I have outgoing working. But incoming is not going through. Although in CDR, for both sipx and Gateway CDR, the calls are showing. Any advice? _______________________________________________ sipx-users mailing list sipx-users@list.sipfoundry.org List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/ _______________________________________________ sipx-users mailing list sipx-users@list.sipfoundry.org List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
