shouldn't the 1:1 nat e able to translate as to which public ip the sipx requests should go, and to where to return them to?
On Feb 22, 2010, at 5:42 PM, Tony Graziano wrote: > Your instance is different in that you have multiple public IP's. > > Specifically I do not know if your phone is on a different subnet than your > DATA network. > > With mulitiple public IP's, I would suspect your firewall LAN rule would have > to include one that pointed the all the same protocols/ports towards the > public IP designated for sipx, otherwise the return route "would not match" > the forwarding destination you've setup on the NAT configuration. > > On Mon, Feb 22, 2010 at 5:16 PM, Francis Tinio <fti...@toqen.com> wrote: > What do you mean by source rules? Are you referring to the LAN side of > firewall rules? I have the default setting of allowing Lan subnet access to > any destination. I checked this against the xml you have in your blog and I > think I have the same Lan rules. Also, I assume that the incoming calls > should still go through with this default rule, but the call does not go > through at all. > > > > ----- Original Message ----- > From: "Tony Graziano" <tgrazi...@myitdepartment.net> > To: fti...@toqen.com, sipx-users@list.sipfoundry.org > Sent: Monday, February 22, 2010 9:44:12 AM GMT -05:00 US/Canada Eastern > Subject: Re: [sipx-users] PfSense and Sipx...no inbound audio, or calls going > through > > Because you are using multiple public ip's, you need to creat source rules > too. > ============================ > Tony Graziano, Manager > Telephone: 434.984.8430 > Fax: 434.984.8431 > > Email: tgrazi...@myitdepartment.net > > LAN/Telephony/Security and Control Systems Helpdesk: > Telephone: 434.984.8426 > Fax: 434.984.8427 > > Helpdesk Contract Customers: > http://www.myitdepartment.net/gethelp/ > > ----- Original Message ----- > From: sipx-users-boun...@list.sipfoundry.org > <sipx-users-boun...@list.sipfoundry.org> > To: sipx-users <sipx-users@list.sipfoundry.org> > Sent: Mon Feb 22 09:28:05 2010 > Subject: [sipx-users] PfSense and Sipx...no inbound audio, or calls going > through > > I reinstalled sipx since I replaced our subnet and firewall from endian to > pfsense. With pfsense, I cannot get any incoming calls. From my cell, I > don't hear anything when I try to dial my incoming DID number. Not even the > operator IVR. > > I have setup Pfsense with my public IPs as virtual Proxy ARP IPs. Then I > created 1:1 NAT and set outbound proxy to advance and remove the default > entry that was created. For the firewall rules I have enabled the WAN side > as well to listen for the following ports: 80, 21, 8443, 12000, 30000 to > 31000. LAN Firewall rules I did not touch. > > I have outgoing working. But incoming is not going through. Although in > CDR, for both sipx and Gateway CDR, the calls are showing. > > Any advice? > _______________________________________________ > sipx-users mailing list sipx-users@list.sipfoundry.org > List Archive: http://list.sipfoundry.org/archive/sipx-users > Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users > sipXecs IP PBX -- http://www.sipfoundry.org/ > > > > -- > ====================== > Tony Graziano, Manager > Telephone: 434.984.8430 > Fax: 434.984.8431 > > Email: tgrazi...@myitdepartment.net > > LAN/Telephony/Security and Control Systems Helpdesk: > Telephone: 434.984.8426 > Fax: 434.984.8427 > > Helpdesk Contract Customers: > http://www.myitdepartment.net/gethelp/ > > Why do mathematicians always confuse Halloween and Christmas? > Because 31 Oct = 25 Dec. >
_______________________________________________ sipx-users mailing list sipx-users@list.sipfoundry.org List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
