since fsense can do its own pcap file from the webgui, why don't you create
one on a call with failed audio so this will identify "why' the audio is
failing.

On Mon, Feb 22, 2010 at 5:42 PM, Tony Graziano <tgrazi...@myitdepartment.net
> wrote:

> Your instance is different in that you have multiple public IP's.
>
> Specifically I do not know if your phone is on a different subnet than your
> DATA network.
>
> With mulitiple public IP's, I would suspect your firewall LAN rule would
> have to include one that pointed the all the same protocols/ports towards
> the public IP designated for sipx, otherwise the return route "would not
> match" the forwarding destination you've setup on the NAT configuration.
>
> On Mon, Feb 22, 2010 at 5:16 PM, Francis Tinio <fti...@toqen.com> wrote:
>
>> What do you mean by source rules?  Are you referring to the LAN side of
>> firewall rules?  I have the default setting of allowing Lan subnet access to
>> any destination.  I checked this against the xml you have in your blog and I
>> think I have the same Lan rules.  Also, I assume that the incoming calls
>> should still go through with this default rule, but the call does not go
>> through at all.
>>
>>
>>
>> ----- Original Message -----
>> From: "Tony Graziano" <tgrazi...@myitdepartment.net>
>> To: fti...@toqen.com, sipx-users@list.sipfoundry.org
>> Sent: Monday, February 22, 2010 9:44:12 AM GMT -05:00 US/Canada Eastern
>> Subject: Re: [sipx-users] PfSense and Sipx...no inbound audio, or calls
>> going  through
>>
>> Because you are using multiple public ip's, you need to creat source rules
>> too.
>> ============================
>> Tony Graziano, Manager
>> Telephone: 434.984.8430
>> Fax: 434.984.8431
>>
>> Email: tgrazi...@myitdepartment.net
>>
>> LAN/Telephony/Security and Control Systems Helpdesk:
>> Telephone: 434.984.8426
>> Fax: 434.984.8427
>>
>> Helpdesk Contract Customers:
>> http://www.myitdepartment.net/gethelp/
>>
>> ----- Original Message -----
>> From: sipx-users-boun...@list.sipfoundry.org
>> <sipx-users-boun...@list.sipfoundry.org>
>> To: sipx-users <sipx-users@list.sipfoundry.org>
>> Sent: Mon Feb 22 09:28:05 2010
>> Subject: [sipx-users] PfSense and Sipx...no inbound audio,      or calls
>> going
>> through
>>
>> I reinstalled sipx since I replaced our subnet and firewall from endian to
>> pfsense.  With pfsense, I cannot get any incoming calls.  From my cell, I
>> don't hear anything when I try to dial my incoming DID number.  Not even
>> the
>> operator IVR.
>>
>> I have setup Pfsense with my public IPs as virtual Proxy ARP IPs.  Then I
>> created 1:1 NAT and set outbound proxy to advance and remove the default
>> entry that was created.  For the firewall rules I have enabled the WAN
>> side
>> as well to listen for the following ports: 80, 21, 8443, 12000, 30000 to
>> 31000. LAN Firewall rules I did not touch.
>>
>> I have outgoing working.  But incoming is not going through.  Although in
>> CDR, for both sipx and Gateway CDR, the calls are showing.
>>
>> Any advice?
>> _______________________________________________
>> sipx-users mailing list sipx-users@list.sipfoundry.org
>> List Archive: http://list.sipfoundry.org/archive/sipx-users
>> Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users
>> sipXecs IP PBX -- http://www.sipfoundry.org/
>>
>
>
>
> --
> ======================
> Tony Graziano, Manager
> Telephone: 434.984.8430
> Fax: 434.984.8431
>
> Email: tgrazi...@myitdepartment.net
>
> LAN/Telephony/Security and Control Systems Helpdesk:
> Telephone: 434.984.8426
> Fax: 434.984.8427
>
> Helpdesk Contract Customers:
> http://www.myitdepartment.net/gethelp/
>
> Why do mathematicians always confuse Halloween and Christmas?
> Because 31 Oct = 25 Dec.
>
>


-- 
======================
Tony Graziano, Manager
Telephone: 434.984.8430
Fax: 434.984.8431

Email: tgrazi...@myitdepartment.net

LAN/Telephony/Security and Control Systems Helpdesk:
Telephone: 434.984.8426
Fax: 434.984.8427

Helpdesk Contract Customers:
http://www.myitdepartment.net/gethelp/

Why do mathematicians always confuse Halloween and Christmas?
Because 31 Oct = 25 Dec.
_______________________________________________
sipx-users mailing list sipx-users@list.sipfoundry.org
List Archive: http://list.sipfoundry.org/archive/sipx-users
Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users
sipXecs IP PBX -- http://www.sipfoundry.org/

Reply via email to