I removed the MOH uri from the phone configurations a couple months ago, but I must not have tested MOH at the sipXbridge after I did that. I re-enabled MOH at the sipXbridge, and it seems to be working correctly now.
If the problems that we had before with MOH don't turn up again in a few days, then I guess it's solved! Thanks! Mike Burden Lynk Systems, Inc e-mail: m...@lynk.com Phone: 616-532-4985 From: Tony Graziano [mailto:tgrazi...@myitdepartment.net] Sent: Thursday, March 04, 2010 4:42 PM To: Burden, Mike Cc: Dale Worley; sipx-users@list.sipfoundry.org Subject: Re: [sipx-users] On hold calls drop after one minute The phones have v 3.1.3 firmware, so I won't address them other than to say you should remove one MOH source so there is only ONE MOH source for calls. Remove the MOH uri from the phone config via sipxconfig and resend the profile to one phone. Try placing your call on hold from that phone with MOH enabled at sipxbridge.
_______________________________________________ sipx-users mailing list sipx-users@list.sipfoundry.org List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/