I was hoping you would have some insight on setting up hylafax manually.
as in no GUI.
I do all my asterisk work without GUI (text files only).
Josh Patten
Assistant Network Administrator
Brazos County IT Dept.
(979) 361-4676
On 3/16/2010 10:06 AM, m...@grounded.net wrote:
The simplest way is to start with a pbx.
For example, set up a stand alone Elastix box, don't enable any of the extra
things, just use the asterisk portion.
Once you've got the pbx working with at least one extension, you'll know it's
ready for the next step which is faxing.
# Install NV_Faxdetect, NV_Backgroundetext and NV_Fax2email
wget
http://www.elastix.org/components/com_joomlaboard/uploaded/files/NV_Apps_elastix_0.zip
unzip NV_Apps_elastix_0.zip
cp NV-Apps-elastix-0.9/*.so /usr/lib/asterisk/modules/
chown asterisk:asterisk /usr/lib/asterisk/modules/app_nv*
chmod +x /usr/lib/asterisk/modules/app_nv*
asterisk -rx "module load app_nv_faxdetect.so"
asterisk -rx "module load app_nv_backgrounddetect.so"
asterisk -rx "module load app_nv_faxemail.so"
To see if you've got everything installed ok, run the following.
asterisk -rx "core show applications like NV"
If you see the three items running, you're good.
amportal restart
At this point, you should be able to create virtual modems using the GUI, then
make the changes in the inbound route of each DID you wish to receive faxes for.
I've heard countless times that Internet faxing is unstable and I'm sure it is
but for one, if you're using a PRI, it will be stable always and for two, if
you're using a reliable ITSP, faxes seem to come in reliably as well. As ITSP's
are Internet based, there is always that factor of course.
As for Avantfax, that's an option if you need it but I really didn't take notes
when I worked on that.
Not sure if this helps but it's a start.
Mike
On Tue, 16 Mar 2010 09:39:06 -0500, Josh Patten wrote:
Would you be kind enough to post how you got hylafax to work? I get
IAXmodem to work but hylafax just doesn't seem to want to do anything.
Josh Patten
Assistant Network Administrator
Brazos County IT Dept.
(979) 361-4676
On 3/16/2010 9:35 AM, m...@grounded.net wrote:
Yes, I've got faxing working fine but it's not on sipx, it's a stand
alone server with hylafax/avantfax.
I have pools of did's on the mediant which are routed to different pbx
machines.
I had found documentation that seemed to imply that the mediant could
route based on incoming fax but it doesn't seem to be able to. You route
based on incoming DID but you can have a pbx or fax server which detects
the fax and handles it.
Mike
On Mon, 08 Mar 2010 15:08:36 +0800, Winson (Elabram) wrote:
Hi Mike,
any news from you regarding the FAX on median 2k?
basically i using m1k as well and looking good solution for FAX
from what i check either use..
1) faxback (direct from m1k to this fax back without sipxecs exp :
PSTN--
m1k-->faxback server ) =====>use m1k to do the routing
2) faxvoip(have assign one sipX account to let FAXVOIP register exp :
PSTN -
-m1k-->sipxecs-->FAXVOIP server )
m...@grounded.net wrote:> http://sipx-
wiki.calivia.com/index.php/HowTo_configure_AudioCodes_SIP_Gateway_with_sipX
I have been working on a mediant 2k (5.6) configuration in order to
allow
voip calls to go to sipx and fax calls to go to a fax server. I have not
found much documentation on how to do this so have yet to find a
solution.
One or two sipx users however have mentioned that they use sipx to
redirect
the fax calls using the dial plan, which is referred to in the above
wiki
link. I've been pulling my hair out for two days trying to figure this
out.
Is there any documentation or information on how to accomplish this, I
cannot find any so far. Thanks.
_______________________________________________ sipx-users mailing list
sipx-users@list.sipfoundry.org List Archive:
http://list.sipfoundry.org/archive/sipx-users Unsubscribe:
http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX --
http://www.sipfoundry.org/
_______________________________________________
sipx-users mailing list sipx-users@list.sipfoundry.org
List Archive: http://list.sipfoundry.org/archive/sipx-users
Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users
sipXecs IP PBX -- http://www.sipfoundry.org/
_______________________________________________
sipx-users mailing list sipx-users@list.sipfoundry.org
List Archive: http://list.sipfoundry.org/archive/sipx-users
Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users
sipXecs IP PBX -- http://www.sipfoundry.org/
_______________________________________________
sipx-users mailing list sipx-users@list.sipfoundry.org
List Archive: http://list.sipfoundry.org/archive/sipx-users
Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users
sipXecs IP PBX -- http://www.sipfoundry.org/
_______________________________________________
sipx-users mailing list sipx-users@list.sipfoundry.org
List Archive: http://list.sipfoundry.org/archive/sipx-users
Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users
sipXecs IP PBX -- http://www.sipfoundry.org/
