|
sorry for reply late, because i from malaysia. Means you done in hylafax(astrisk)?but i never touch this hylafax and astrisk before Can i have some guide for this? Since last month i replace all of the normal analog line to PRI (under m1k gateway), and now i pure use sipxecs to my phone system I really need one fax server to receive fax i found out one fax software call FAXVOIP link, it look like can support sipxecs. m...@grounded.net wrote: The setup is all from CLI but once installed, you could do your configs from CLI or GUI is my guess since it's all in the config files of course.On Tue, 16 Mar 2010 11:06:06 -0500, Josh Patten wrote:I was hoping you would have some insight on setting up hylafax manually. as in no GUI. I do all my asterisk work without GUI (text files only). Josh Patten Assistant Network Administrator Brazos County IT Dept. (979) 361-4676 On 3/16/2010 10:06 AM, m...@grounded.net wrote: > The simplest way is to start with a pbx. For example, set up a stand alone Elastix box, don't enable any of the extra things, just use the asterisk portion. Once you've got the pbx working with at least one extension, you'll know it's ready for the next step which is faxing. # Install NV_Faxdetect, NV_Backgroundetext and NV_Fax2email wget http://www.elastix.org/components/com_joomlaboard/uploaded/files/NV_Apps_elast ix_0.zip unzip NV_Apps_elastix_0.zip cp NV-Apps-elastix-0.9/*.so /usr/lib/asterisk/modules/ chown asterisk:asterisk /usr/lib/asterisk/modules/app_nv* chmod +x /usr/lib/asterisk/modules/app_nv* asterisk -rx "module load app_nv_faxdetect.so" asterisk -rx "module load app_nv_backgrounddetect.so" asterisk -rx "module load app_nv_faxemail.so" To see if you've got everything installed ok, run the following. asterisk - rx "core show applications like NV" If you see the three items running, you're good. amportal restart At this point, you should be able to create virtual modems using the GUI, then make the changes in the inbound route of each DID you wish to receive faxes for. I've heard countless times that Internet faxing is unstable and I'm sure it is but for one, if you're using a PRI, it will be stable always and for two, if you're using a reliable ITSP, faxes seem to come in reliably as well. As ITSP's are Internet based, there is always that factor of course. As for Avantfax, that's an option if you need it but I really didn't take notes when I worked on that. Not sure if this helps but it's a start. Mike On Tue, 16 Mar 2010 09:39:06 -0500, Josh Patten wrote: > Would you be kind enough to post how you got hylafax to work? I get IAXmodem to work but hylafax just doesn't seem to want to do anything. Josh Patten Assistant Network Administrator Brazos County IT Dept. (979) 361-4676 On 3/16/2010 9:35 AM, m...@grounded.net wrote: > Yes, I've got faxing working fine but it's not on sipx, it's a stand alone server with hylafax/avantfax. I have pools of did's on the mediant which are routed to different pbx machines. I had found documentation that seemed to imply that the mediant could route based on incoming fax but it doesn't seem to be able to. You route based on incoming DID but you can have a pbx or fax server which detects the fax and handles it. Mike On Mon, 08 Mar 2010 15:08:36 +0800, Winson (Elabram) wrote: > Hi Mike, any news from you regarding the FAX on median 2k? basically i using m1k as well and looking good solution for FAX from what i check either use.. 1) faxback (direct from m1k to this fax back without sipxecs exp : PSTN-- > m1k-->faxback server ) =====>use m1k to do the routing2) faxvoip(have assign one sipX account to let FAXVOIP register exp : PSTN - -m1k-->sipxecs-->FAXVOIP server ) m...@grounded.net wrote:> http://sipx- wiki.calivia.com/index.php/HowTo_configure_AudioCodes_SIP_Gateway_with_sipX I have been working on a mediant 2k (5.6) configuration in order to allow voip calls to go to sipx and fax calls to go to a fax server. I have not found much documentation on how to do this so have yet to find a solution. One or two sipx users however have mentioned that they use sipx to redirect the fax calls using the dial plan, which is referred to in the above wiki link. I've been pulling my hair out for two days trying to figure this out. Is there any documentation or information on how to accomplish this, I cannot find any so far. Thanks. _______________________________________________ sipx-users mailing list sipx-users@list.sipfoundry.org List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/_______________________________________________ sipx-users mailing list sipx-users@list.sipfoundry.org List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/_______________________________________________ sipx-users mailing list sipx-users@list.sipfoundry.org List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX - - http://www.sipfoundry.org/_______________________________________________ sipx-users mailing list sipx-users@list.sipfoundry.org List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/_______________________________________________ sipx-users mailing list sipx-users@list.sipfoundry.org List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/ |
_______________________________________________ sipx-users mailing list sipx-users@list.sipfoundry.org List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
