It is running 3.1.3RC I've got a similar implementation with that firmware and it does seem to work fine there.
The ingate has all sip signaling set to go to the SipXecs, the audiocodes is set to the sipxecs as the proxy but has the normal internet gateway as it's default gateway. I can make the calls individually and even split the two calls and resume them individually just fine. When I run a sipxtrace on either call I can't find any signaling that would indicate a problem. When I use two calls on the Ingate I can see the two calls in the Sip status and when the conference happens I can see the audio rebuild and it says that it has a two way connection with the same phone. Is there somewhere else I can get a call trace other than sipXproxy logs that would point me in the right media signaling or other logs to take a look at? The last time I had problems with a conference it wasn't actually with the phone, but with the Ingate causing one way audio on one of the legs, this isn't the same case here and I'm currently at a loss. From: Tony Graziano [mailto:tgrazi...@myitdepartment.net] Sent: Tuesday, March 16, 2010 4:33 PM To: Lara Johnson Cc: sipx-users@list.sipfoundry.org Subject: Re: [sipx-users] One sided conference On Tue, Mar 16, 2010 at 4:26 PM, Lara Johnson <lcr...@ciscorp.biz<mailto:lcr...@ciscorp.biz>> wrote: Running sipx 4.0.4 Bootrom 4.1.2 Sipversion 3.1 3.1.3RevC? If so, all good. This is just the conferencing function to join two calls on the phone, it "should" work. A call trace might provide useful since the handset signalling would be important to understand why. I would want to scrutinize the "media" path since those both (each gateway) might have a different default route. Can someone assume sipx, the phone, the AC gateway all use the Ingate as their gateway (route in ip4)? From: Tony Graziano [mailto:tgrazi...@myitdepartment.net<mailto:tgrazi...@myitdepartment.net>] Sent: Tuesday, March 16, 2010 4:23 PM To: Lara Johnson Cc: sipx-users@list.sipfoundry.org<mailto:sipx-users@list.sipfoundry.org> Subject: Re: [sipx-users] One sided conference On Tue, Mar 16, 2010 at 4:16 PM, Lara Johnson <lcr...@ciscorp.biz<mailto:lcr...@ciscorp.biz>> wrote: I'm using polycom soundpoint ip 450's and most of my calling features are working properly. I have a setup with audiocodes analog lines inbound and broadvox outbound. If I try to conference via the polycom phone I can call the first leg and call the second leg, but when I press conference. It says I'm in a conference with the first leg, but I can only talk to and hear the call I was on when I hit conference the second time. I can split the calls and join from the other caller and I can hear that caller only. I've also tried calling in on one call (through audiocodes) and calling the second party (broadvox) to see if two calls on the Ingate is causing the issue. But the same problem happens. I've tried looking in sipXproxy logs for any errors and I cannot find any. Is there anywhere else I can look? _______________________________________________ sipx-users mailing list sipx-users@list.sipfoundry.org<mailto:sipx-users@list.sipfoundry.org> List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/ What sipx version? What bootrom and formware on the polycoms? -- ====================== Tony Graziano, Manager Telephone: 434.984.8430 Fax: 434.984.8431 Email: tgrazi...@myitdepartment.net<mailto:tgrazi...@myitdepartment.net> LAN/Telephony/Security and Control Systems Helpdesk: Telephone: 434.984.8426 Fax: 434.984.8427 Helpdesk Contract Customers: http://www.myitdepartment.net/gethelp/ Why do mathematicians always confuse Halloween and Christmas? Because 31 Oct = 25 Dec.
_______________________________________________ sipx-users mailing list sipx-users@list.sipfoundry.org List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
