Hi Mate, Going back to 8.3.5 firmware for cisco 7970G doesn't solve the problem. Polycom still unavailbe to dial any cisco phones.
Any chance for you share what you did with 7970G and 8.3.5 firmware to make polycom communicate with Cisco? Thanks in advance. Rhon On Thu, Apr 22, 2010 at 3:17 AM, Nathan Nieblas <nathan.nieb...@sacatech.com > wrote: > No just running the latest firmware on the phones to get them working and > dealing with the Polycom -> Cisco issue. It worked with the 8.3.5 code. > We’re moving to Cisco CallManager soon, there are just too many operability > issues with this PBX to deal with. > > > > > > > > Nathan Nieblas > > SACA Technologies, Inc. > > 1260 N. Hancock Street, Suite 102 > > Anaheim Hills, CA 92807 > > > > p: 714-777-3222 x113 > > f: 888-603-9033 > > e: nathan.nieb...@sacatech.com > > > > *From:* Rhon [mailto:c4rdi...@gmail.com] > *Sent:* Wednesday, April 21, 2010 9:51 AM > *To:* Nathan Nieblas > > *Subject:* Re: [sipx-users] Cisco and sipX 4.2 > > > > Did you manage to get any progress with this problem? I'm still stuck with > it. > > Brgds, > > RHon > > On Wed, Apr 21, 2010 at 6:27 AM, Nathan Nieblas < > nathan.nieb...@sacatech.com> wrote: > > P0S3-08-11-00 is for 7940 and 7960 models, I guess I should have been > more detailed.. We are using 7941, 7961 and 7970's with Polycom 3xx > series. > > > -----Original Message----- > From: sipx-users-boun...@list.sipfoundry.org > > [mailto:sipx-users-boun...@list.sipfoundry.org] On Behalf Of Matt White > Sent: Tuesday, April 20, 2010 6:01 AM > To: sipx-users@list.sipfoundry.org > Subject: Re: [sipx-users] Cisco and sipX 4.2 > > > >>> On 4/19/2010 at 08:44 PM, in message > <e010ecb9aab57a418d87234287233e04efc...@saca-exchange.sacaexchange.local > >, > "Nathan Nieblas" <nathan.nieb...@sacatech.com> wrote: > > Ran into some firmware compatibility issues after upgrading from 4.0 > to > > 4.2 > > > > > > > > Firmware 8.3.5 on 79xx would only ring internal extensions but not > dial > > over the trunk, it would just hang until there was a reorder. > > > > Firmware 8.5.4 on 79xx works with no known issues so far, however we > run > > into the Polycom calling the Cisco phone issues again. > > > > > > > > Just FYI... If anyone has anything to share Cisco related I'm all ears > J > > > > > > > We are testing 79xx series with P0S3-08-11-00, the only issue we are > seeing right now is that the MWI never turns off with 4.2 > > But we have not seen any of the polycom calling issues or dial over > trunk issues in testing....yet > > -M > > _______________________________________________ > sipx-users mailing list sipx-users@list.sipfoundry.org > List Archive: http://list.sipfoundry.org/archive/sipx-users > Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users > sipXecs IP PBX -- http://www.sipfoundry.org/ > _______________________________________________ > sipx-users mailing list sipx-users@list.sipfoundry.org > List Archive: http://list.sipfoundry.org/archive/sipx-users > Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users > sipXecs IP PBX -- http://www.sipfoundry.org/ > > >
_______________________________________________ sipx-users mailing list sipx-users@list.sipfoundry.org List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
