Hello Michael, I have the static NAT port set to NO on pfsense.
Also, to I have to enable NAT traversal on sipx? Thanks On Mon, May 17, 2010 at 3:20 PM, Picher, Michael <mpic...@cmctechgroup.com>wrote: > Static NAT port on the pfSense? > > > > *From:* sipx-users-boun...@list.sipfoundry.org [mailto: > sipx-users-boun...@list.sipfoundry.org] *On Behalf Of *Rhon > *Sent:* Monday, May 17, 2010 9:14 AM > *To:* sipx-users@list.sipfoundry.org > *Subject:* [sipx-users] No Voice/IVR on Site-to-Site > > > > Hi, > > I have a problem with our deployment with SipXecs 4.2 which was installed > fresh using ISO build. > > We cannot hear anything on both sides but are able to connect and can ring > the other end. Calling the IVR is ok but no audio as well. > > SITE A: > 100 - 199 > > SITE B: > 200 - 299 > > Everything passed using Configurations tests. > > Our networks are setup as seen below: > > SITE A SIPX --> PFSENSE --> CISCO --> |||| VIA GRE TUNNEL |||| <-- CISCO > <-- PFSENSE <-- SIPX SITEB > > Any thoughts on what the problem could be? > > I have bypassed everything on the firewall at the moment. > > Thank you in advance. > > Rhon > > >
_______________________________________________ sipx-users mailing list sipx-users@list.sipfoundry.org List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/