Also, I set the pfsense *to Manual Outbound NAT rule generation (Advanced Outbound NAT (AON))*
My NAT rules below for my voice VLAN: WAN 172.16.3.0/24 * * * * * NO Thanks again for your help. Brgds, Rhon On Mon, May 17, 2010 at 3:33 PM, Rhon <c4rdi...@gmail.com> wrote: > Hello Michael, > > I have the static NAT port set to NO on pfsense. > > Also, to I have to enable NAT traversal on sipx? > > Thanks > > > On Mon, May 17, 2010 at 3:20 PM, Picher, Michael <mpic...@cmctechgroup.com > > wrote: > >> Static NAT port on the pfSense? >> >> >> >> *From:* sipx-users-boun...@list.sipfoundry.org [mailto: >> sipx-users-boun...@list.sipfoundry.org] *On Behalf Of *Rhon >> *Sent:* Monday, May 17, 2010 9:14 AM >> *To:* sipx-users@list.sipfoundry.org >> *Subject:* [sipx-users] No Voice/IVR on Site-to-Site >> >> >> >> Hi, >> >> I have a problem with our deployment with SipXecs 4.2 which was installed >> fresh using ISO build. >> >> We cannot hear anything on both sides but are able to connect and can ring >> the other end. Calling the IVR is ok but no audio as well. >> >> SITE A: >> 100 - 199 >> >> SITE B: >> 200 - 299 >> >> Everything passed using Configurations tests. >> >> Our networks are setup as seen below: >> >> SITE A SIPX --> PFSENSE --> CISCO --> |||| VIA GRE TUNNEL |||| <-- CISCO >> <-- PFSENSE <-- SIPX SITEB >> >> Any thoughts on what the problem could be? >> >> I have bypassed everything on the firewall at the moment. >> >> Thank you in advance. >> >> Rhon >> >> >> >
_______________________________________________ sipx-users mailing list sipx-users@list.sipfoundry.org List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/