There is no routing based on source #... When a call comes in, what does the call flow look like?
inbound -> auto attendant -> pick#/dial ext or inbound -> directly to user with DID ? Describe the call flow please... On Thu, Nov 25, 2010 at 2:48 AM, Todd Hodgen <thod...@frontier.com> wrote: > Admittedly, I tried this on my system and notes the steps and it worked on > inside calls as requested. However, I didn’t try an outside call into an > extension. L Apparently, you are saying that fails. L > > > > *From:* sipx-users-boun...@list.sipfoundry.org [mailto: > sipx-users-boun...@list.sipfoundry.org] *On Behalf Of *David Sharafy > *Sent:* Wednesday, November 24, 2010 2:09 PM > *To:* Discussion list for users of sipXecs software; mpic...@gmail.com > > *Subject:* Re: [sipx-users] Disable user to user calls > > > > calls are coming in via a Gateway.. Audiocodes M1K... how about call > routing based on caller ID? As I mentioned, Todd's method worked but created > an issue with inbound... Can there be a dial plan setup based on the Caller > ID, so if the CallerID is xxxxxx then send the call to the users otherwise > send a call to a phantom user... > > > > your help is appreciated. > > > > Thanks > > > > > > *From:* sipx-users-boun...@list.sipfoundry.org [mailto: > sipx-users-boun...@list.sipfoundry.org] *On Behalf Of *Michael Picher > *Sent:* Wednesday, November 24, 2010 2:37 PM > *To:* Discussion list for users of sipXecs software > *Subject:* Re: [sipx-users] Disable user to user calls > > > > This is happening because the dial plan is processed first... Sorry to > shoot you down Todd... :-) > > > > How are these calls coming in to the system? Gateway? SIP Trunk? > > > > This solution is going to be a total hack job (if it can be done)... but > it kind of sounds pretty screwed up to begin with. > > > > > > > > On Tue, Nov 23, 2010 at 12:16 PM, David Sharafy <da...@ccds.ca> wrote: > > thanks.. I setup the custom plan but that created issues with inbound > calls.. I have an Audiocodes TDM to IP gateway.. so my PBX is basically > sending a call to Audiocodes and then being converted to SIP and sent to > SIPx.. for example if the user on sipx is 222 then audiocodes is sending > 2...@mysipx > > > > when I implemented the rules you suggested, the user couldn't receive any > more calls from Audiocodes, at the same time the users was unable to place > any call which is what we want. > > > > Is there a way to setup a Dial plan for outbound calls only? > > > > > > > > *From:* sipx-users-boun...@list.sipfoundry.org [mailto: > sipx-users-boun...@list.sipfoundry.org] *On Behalf Of *Todd Hodgen > *Sent:* Monday, November 22, 2010 8:23 PM > *To:* 'Discussion list for users of sipXecs software' > *Subject:* Re: [sipx-users] Disable user to user calls > > > > Go to System/Dialplans. > > > > Add new “Custom” plan from the dropdown > > > > On the template, give it a name, click on enable, then set the dial rule. > IF you have 3 digit extensions as an example, that start with 7, then build > a rule under Dialed Number of Prefix “7”, and “2 digits” > > > > Drop to Resulting Call and enter a number to call when they dial a 3 digit > extension. You could build an auto attendant that they reach that gives > them a personal auto attendant of numbers they can reach – managers, HR, > etc. > > > > *From:* sipx-users-boun...@list.sipfoundry.org [mailto: > sipx-users-boun...@list.sipfoundry.org] *On Behalf Of *David Sharafy > *Sent:* Monday, November 22, 2010 4:14 PM > *To:* sipx-users@list.sipfoundry.org > *Subject:* [sipx-users] Disable user to user calls > > > > Hi, > > > > I have a setup that requires users on Sipx to receive calls *only* and not > be able to call each other.. > > > > how can I disable a user from calling another extension? > > > > Thanks > > > > > _______________________________________________ > sipx-users mailing list > sipx-users@list.sipfoundry.org > List Archive: http://list.sipfoundry.org/archive/sipx-users/ > > > > > -- > There are 10 kinds of people in this world, those who understand binary and > those who don't. > > mpic...@gmail.com > blog: http://www.sipxecs.info > call: sip:mpic...@sipxecs.info <sip%3ampic...@sipxecs.info> > > _______________________________________________ > sipx-users mailing list > sipx-users@list.sipfoundry.org > List Archive: http://list.sipfoundry.org/archive/sipx-users/ > -- There are 10 kinds of people in this world, those who understand binary and those who don't. mpic...@gmail.com blog: http://www.sipxecs.info call: sip:mpic...@sipxecs.info <sip%3ampic...@sipxecs.info>
_______________________________________________ sipx-users mailing list sipx-users@list.sipfoundry.org List Archive: http://list.sipfoundry.org/archive/sipx-users/