Tony, Thanks again for your help. I just spoke to Patton... great support by the way. Real person even. They stated there are a lot of detection problems with the 4425 and recommended updating to latest firmware on both devices. I am going to do the FXS now and will do the PRI gateway after hours.
Jes On Thu, Apr 19, 2012 at 12:54 PM, Tony Graziano < tgrazi...@myitdepartment.net> wrote: > I will send you an fxs config I use all the time offline/ > > > On Thu, Apr 19, 2012 at 12:51 PM, Becker, Jesse <beck...@sunyulster.edu>wrote: > >> Tony, >> My PRI config matches yours. I will get in touch with Patton to see if >> they can help me get this resolved. >> >> Thanks, >> >> Jes >> >> >> On Thu, Apr 19, 2012 at 12:42 PM, Tony Graziano < >> tgrazi...@myitdepartment.net> wrote: >> >>> No. I thought I sent you a 4960 config some time ago. The most recent >>> one I put on the wiki does work in conjunction with the 4424 profile I >>> already gave you though. >>> >>> I'm sure if it doesnt work after comparing, patton can fix with you >>> though. >>> >>> >>> On Thu, Apr 19, 2012 at 12:38 PM, Becker, Jesse >>> <beck...@sunyulster.edu>wrote: >>> >>>> Tony, >>>> I had guessed the no as I thought it would be similar to Cisco. The >>>> issue was that you have to omit the number (ie. 2) for it to work. >>>> >>>> Any ideas on why it still isn't does t.38? Do I need to make the same >>>> modifications you sent me for the 4424 to the SN4950 (T1 gateway) ? >>>> >>>> Thanks, >>>> >>>> Jes >>>> >>>> On Thu, Apr 19, 2012 at 12:19 PM, Tony Graziano < >>>> tgrazi...@myitdepartment.net> wrote: >>>> >>>>> no *codec 2 g711alaw64k rx-length 20 tx-length 20* >>>>> >>>>> >>>>> On Thu, Apr 19, 2012 at 11:27 AM, Jesse Becker <beck...@sunyulster.edu >>>>> > wrote: >>>>> >>>>>> Tony, >>>>>> I modified my profile voip default. It didn't accept some of the >>>>>> command, and the configuration is now: >>>>>> * >>>>>> profile voip default >>>>>> codec 1 g711ulaw64k rx-length 20 tx-length 20 >>>>>> codec 2 transparent-clearmode rx-length 20 tx-length 20 >>>>>> no dtmf-relay >>>>>> rtp traffic-class local-default >>>>>> no dtmf-mute-encoder >>>>>> dejitter-mode static >>>>>> >>>>>> fax transmission 1 relay t38-udp >>>>>> fax volume -13.5 >>>>>> fax dejitter-max-delay 60 >>>>>> fax detection fax-frames >>>>>> >>>>>> modem dejitter-max-delay 60 >>>>>> no modem detection on-remote-fax-request >>>>>> * >>>>>> >>>>>> Attached is an updated debug. It still doesn't appear to be using >>>>>> t.38. For some reason it sitll appears to use the g711u. >>>>>> >>>>>> Do I need to add the additional commands you provided to the Patton >>>>>> T1 gateway? Currently it's profile shows: >>>>>> * >>>>>> profile voip default >>>>>> codec 1 g711ulaw64k rx-length 20 tx-length 20 >>>>>> codec 2 g711alaw64k rx-length 20 tx-length 20 >>>>>> dtmf-relay rtp >>>>>> flash-hook-relay rtp >>>>>> rtp traffic-class local-default >>>>>> >>>>>> fax transmission 1 relay t38-udp >>>>>> fax transmission 2 bypass g711ulaw64k >>>>>> fax detection fax-frames >>>>>> * >>>>>> >>>>>> For the test, we are faxing from a fax machine on a Verizon POTS line >>>>>> to a fax machine on the Patton FXS gateway. So the fax call goes out on a >>>>>> POTS, comes in on the PRI T1 (Patton), then to SipX, then to the FXS >>>>>> gateway. >>>>>> >>>>>> Also, how do your remove a line of configuration via that CLI? For >>>>>> example, while in profile voip default, how would I then remove a line, >>>>>> for >>>>>> example: *codec 2 g711alaw64k rx-length 20 tx-length 20 >>>>>> >>>>>> *Thanks, >>>>>> >>>>>> Jes >>>>>> >>>>>> >>>>>> On 04/18/2012 05:42 PM, Becker, Jesse wrote: >>>>>> >>>>>> Tony, >>>>>> Thank you. I will give that a shot. >>>>>> >>>>>> Jes >>>>>> On Apr 18, 2012 4:48 PM, "Tony Graziano" < >>>>>> tgrazi...@myitdepartment.net> wrote: >>>>>> >>>>>>> The profile is not negotiating t.38, it clearly shows g711u. >>>>>>> >>>>>>> profile voip default >>>>>>> codec 1 g711ulaw64k rx-length 20 tx-length 20 >>>>>>> codec 2 transparent-clearmode rx-length 20 tx-length 20 >>>>>>> no dtmf-relay >>>>>>> rtp traffic-class local-default >>>>>>> no dtmf-mute-encoder >>>>>>> response-preferred-codec g711ulaw64k >>>>>>> dejitter-mode static >>>>>>> media detection-timeout 5 >>>>>>> fax transmission 1 relay t38-udp >>>>>>> fax volume -13.5 >>>>>>> fax dejitter-max-delay 60 >>>>>>> modem dejitter-max-delay 60 >>>>>>> no modem detection on-remote-fax-request >>>>>>> >>>>>>> Try that on The 4424. >>>>>>> On Apr 18, 2012 4:23 PM, "Becker, Jesse" <beck...@sunyulster.edu> >>>>>>> wrote: >>>>>>> >>>>>>>> All, >>>>>>>> We are experiencing intermittent issues on our fax machines >>>>>>>> connected to a Patton SN4424. Outbound seems to work reliably, >>>>>>>> however, we >>>>>>>> have issues with incoming calls. The call get answers, and then seems >>>>>>>> to >>>>>>>> disconnect before the fax can finish. >>>>>>>> >>>>>>>> Incoming calls hit a Patton 4e1t1 device first, then SipX, then >>>>>>>> registered UA on the Patton SN4424. >>>>>>>> >>>>>>>> On both devices I have configured: >>>>>>>> fax transmission 1 relay t38-udp >>>>>>>> fax transmission 2 bypass g711ulaw64k >>>>>>>> fax detection fax-frames >>>>>>>> under the profile voip default. >>>>>>>> >>>>>>>> Attached you will find the T1 gateway config, FXS gateway config, >>>>>>>> as well as a call-control debug on an incoming fax that did not >>>>>>>> complete. >>>>>>>> I have removed all passwords and replaced the caller id prefix with >>>>>>>> NPANXX to hide full number. >>>>>>>> >>>>>>>> >>>>>>>> Did I miss something in the config ? >>>>>>>> Any assistance would be appreciated. >>>>>>>> >>>>>>>> Thanks, >>>>>>>> >>>>>>>> Jes >>>>>>>> -- >>>>>>>> >>>>>>>> >>>>>>>> Jesse Becker >>>>>>>> >>>>>>>> Technical Manager >>>>>>>> Office of Information Technology >>>>>>>> Network+ | Linux+ Certified Professional >>>>>>>> Ellucian @ SUNY Ulster >>>>>>>> 491 Cottekill Road, Stone Ridge, NY 12484 >>>>>>>> Tel 845-687-5064 | Fax 845-687-5105 >>>>>>>> beck...@sunyulster.edu | www.sunyulster.edu >>>>>>>> >>>>>>>> Open or check the status of a ticket by visiting Helpdesk >>>>>>>> Online<https://helpdesk.sunyulster.edu/> >>>>>>>> Look up answers to frequently asked questions by visiting the Knowledge >>>>>>>> Base <https://kb.sunyulster.edu/> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> _______________________________________________ >>>>>>>> sipx-users mailing list >>>>>>>> sipx-users@list.sipfoundry.org >>>>>>>> List Archive: http://list.sipfoundry.org/archive/sipx-users/ >>>>>>>> >>>>>>> >>>>>>> LAN/Telephony/Security and Control Systems Helpdesk: >>>>>>> Telephone: 434.984.8426 >>>>>>> sip: helpd...@voice.myitdepartment.net >>>>>>> >>>>>>> Helpdesk Customers: http://myhelp.myitdepartment.net >>>>>>> Blog: http://blog.myitdepartment.net >>>>>>> >>>>>>> _______________________________________________ >>>>>>> sipx-users mailing list >>>>>>> sipx-users@list.sipfoundry.org >>>>>>> List Archive: http://list.sipfoundry.org/archive/sipx-users/ >>>>>>> >>>>>> >>>>>> _______________________________________________ >>>>>> sipx-users mailing list >>>>>> sipx-users@list.sipfoundry.org >>>>>> List Archive: http://list.sipfoundry.org/archive/sipx-users/ >>>>>> >>>>> >>>>> >>>>> >>>>> -- >>>>> ~~~~~~~~~~~~~~~~~~ >>>>> Tony Graziano, Manager >>>>> Telephone: 434.984.8430 >>>>> sip: tgrazi...@voice.myitdepartment.net >>>>> Fax: 434.465.6833 >>>>> ~~~~~~~~~~~~~~~~~~ >>>>> Linked-In Profile: >>>>> http://www.linkedin.com/pub/tony-graziano/14/4a6/7a4 >>>>> Ask about our Internet Fax services! >>>>> ~~~~~~~~~~~~~~~~~~ >>>>> >>>>> >>>>> LAN/Telephony/Security and Control Systems Helpdesk: >>>>> Telephone: 434.984.8426 >>>>> sip: >>>>> helpdesk@voice.myitdepartment.**net<helpd...@voice.myitdepartment.net> >>>>> >>>>> Helpdesk Customers: >>>>> http://myhelp.myitdepartment.**net<http://myhelp.myitdepartment.net> >>>>> Blog: http://blog.myitdepartment.net >>>>> >>>>> _______________________________________________ >>>>> sipx-users mailing list >>>>> sipx-users@list.sipfoundry.org >>>>> List Archive: http://list.sipfoundry.org/archive/sipx-users/ >>>>> >>>> >>>> >>>> >>>> -- >>>> >>>> >>>> Jesse Becker >>>> >>>> Technical Manager >>>> Office of Information Technology >>>> Network+ | Linux+ Certified Professional >>>> Ellucian @ SUNY Ulster >>>> 491 Cottekill Road, Stone Ridge, NY 12484 >>>> Tel 845-687-5064 | Fax 845-687-5105 >>>> beck...@sunyulster.edu | www.sunyulster.edu >>>> >>>> <http://www.sunyulster.edu/> >>>> >>>> Open or check the status of a ticket by visiting Helpdesk >>>> Online<https://helpdesk.sunyulster.edu/> >>>> Look up answers to frequently asked questions by visiting the Knowledge >>>> Base <https://kb.sunyulster.edu/> >>>> >>>> >>>> >>>> _______________________________________________ >>>> sipx-users mailing list >>>> sipx-users@list.sipfoundry.org >>>> List Archive: http://list.sipfoundry.org/archive/sipx-users/ >>>> >>> >>> >>> >>> -- >>> ~~~~~~~~~~~~~~~~~~ >>> Tony Graziano, Manager >>> Telephone: 434.984.8430 >>> sip: tgrazi...@voice.myitdepartment.net >>> Fax: 434.465.6833 >>> ~~~~~~~~~~~~~~~~~~ >>> Linked-In Profile: >>> http://www.linkedin.com/pub/tony-graziano/14/4a6/7a4 >>> Ask about our Internet Fax services! >>> ~~~~~~~~~~~~~~~~~~ >>> >>> LAN/Telephony/Security and Control Systems Helpdesk: >>> Telephone: 434.984.8426 >>> sip: helpdesk@voice.myitdepartment.**net<helpd...@voice.myitdepartment.net> >>> >>> Helpdesk Customers: >>> http://myhelp.myitdepartment.**net<http://myhelp.myitdepartment.net> >>> Blog: http://blog.myitdepartment.net >>> >>> _______________________________________________ >>> sipx-users mailing list >>> sipx-users@list.sipfoundry.org >>> List Archive: http://list.sipfoundry.org/archive/sipx-users/ >>> >> >> >> >> -- >> >> >> Jesse Becker >> >> Technical Manager >> Office of Information Technology >> Network+ | Linux+ Certified Professional >> Ellucian @ SUNY Ulster >> 491 Cottekill Road, Stone Ridge, NY 12484 >> Tel 845-687-5064 | Fax 845-687-5105 >> beck...@sunyulster.edu | www.sunyulster.edu >> >> <http://www.sunyulster.edu/> >> >> Open or check the status of a ticket by visiting Helpdesk >> Online<https://helpdesk.sunyulster.edu/> >> Look up answers to frequently asked questions by visiting the Knowledge >> Base <https://kb.sunyulster.edu/> >> >> >> >> _______________________________________________ >> sipx-users mailing list >> sipx-users@list.sipfoundry.org >> List Archive: http://list.sipfoundry.org/archive/sipx-users/ >> > > > > -- > ~~~~~~~~~~~~~~~~~~ > Tony Graziano, Manager > Telephone: 434.984.8430 > sip: tgrazi...@voice.myitdepartment.net > Fax: 434.465.6833 > ~~~~~~~~~~~~~~~~~~ > Linked-In Profile: > http://www.linkedin.com/pub/tony-graziano/14/4a6/7a4 > Ask about our Internet Fax services! > ~~~~~~~~~~~~~~~~~~ > > LAN/Telephony/Security and Control Systems Helpdesk: > Telephone: 434.984.8426 > sip: helpdesk@voice.myitdepartment.**net<helpd...@voice.myitdepartment.net> > > Helpdesk Customers: > http://myhelp.myitdepartment.**net<http://myhelp.myitdepartment.net> > Blog: http://blog.myitdepartment.net > > _______________________________________________ > sipx-users mailing list > sipx-users@list.sipfoundry.org > List Archive: http://list.sipfoundry.org/archive/sipx-users/ > -- Jesse Becker Technical Manager Office of Information Technology Network+ | Linux+ Certified Professional Ellucian @ SUNY Ulster 491 Cottekill Road, Stone Ridge, NY 12484 Tel 845-687-5064 | Fax 845-687-5105 beck...@sunyulster.edu | www.sunyulster.edu <http://www.sunyulster.edu/> Open or check the status of a ticket by visiting Helpdesk Online<https://helpdesk.sunyulster.edu/> Look up answers to frequently asked questions by visiting the Knowledge Base<https://kb.sunyulster.edu/>
_______________________________________________ sipx-users mailing list sipx-users@list.sipfoundry.org List Archive: http://list.sipfoundry.org/archive/sipx-users/