David, Flat out, it's not going to work. From my understanding the Cisco 79xx will not do SLA with our commercial product. I don't think they even do SLA if they are running SIP and talking to Call Manager.
Sounds like you may have made a poor gamble. Not sure what else to tell you. You have to prove the concept of VoIP? :-) Mike On Sun, Nov 4, 2012 at 6:50 PM, David Fulton-Howard < difultonhow...@mcdonogh.org> wrote: > Nine, the one Polycom, and zero other handsets. :( We liked how it > worked with Asterisk better than the Polycom, so we bought more, but then > switched to sipXecs because Asterisk doesn't do SLA well at all, and > SipXecs does. We're trying to set up a VoIP proof of concept on a > shoestring budget so we can get approval to replace our legacy PBX, and > we're probably not going to be able to return the Ciscos, so I'd like to > get them to work if at all possible. > > David Fulton-Howard > McDonogh School Technology Department > Sent from a mobile device; please excuse typos. > On Nov 4, 2012 6:18 PM, "Josh Patten" <jpat...@ezuce.com> wrote: > >> How many of these sets do you have? If it's only a few it would be worth >> your time just to buy new sets. Cisco 79xx phones have notoriously bad SIP >> stacks and as a result don't work well in a pure SIP proxy environment like >> sipXecs. Let us know how many of them you have. >> >> >> On Sun, Nov 4, 2012 at 2:37 PM, David Fulton-Howard < >> difultonhow...@mcdonogh.org> wrote: >> >>> Any ideas on how to get the Cisco 7961G phone working with sipXecs? I >>> have it working on an Asterisk installation, but when registered on the >>> sipXecs server, whatever I do to the phone config, I can dial voicemail >>> (101) but not any extensions. When dialing voicemail, I get the standard >>> automated menu; when dialing an extension, I get a fast busy signal and >>> "Reorder" on the display. I have tried the phone config file straight out >>> of sipXecs 4.4.0, a phone config file that is functionally identical to the >>> working Asterisk one but with the sipXecs server and login, and basically >>> everything in between. I also have a Polycom SoundPoint IP 601 phone that >>> is working fine with sipXecs. I have tried restarting the server -- still >>> no dice. >>> >>> Help! >>> >>> _______________________________________________ >>> sipx-users mailing list >>> sipx-users@list.sipfoundry.org >>> List Archive: http://list.sipfoundry.org/archive/sipx-users/ >>> >> >> >> >> -- >> Josh Patten >> eZuce >> Solutions Architect >> O.978-296-1005 X2050 >> M.979-574-5699 >> http://www.ezuce.com >> >> >> _______________________________________________ >> sipx-users mailing list >> sipx-users@list.sipfoundry.org >> List Archive: http://list.sipfoundry.org/archive/sipx-users/ >> > > _______________________________________________ > sipx-users mailing list > sipx-users@list.sipfoundry.org > List Archive: http://list.sipfoundry.org/archive/sipx-users/ > -- Michael Picher, Director of Technical Services eZuce, Inc. 300 Brickstone Square**** Suite 201**** Andover, MA. 01810 O.978-296-1005 X2015 M.207-956-0262 @mpicher <http://twitter.com/mpicher> linkedin <http://www.linkedin.com/profile/view?id=35504760&trk=tab_pro> www.ezuce.com ------------------------------------------------------------------------------------------------------------ There are 10 kinds of people in the world, those who understand binary and those who don't.
_______________________________________________ sipx-users mailing list sipx-users@list.sipfoundry.org List Archive: http://list.sipfoundry.org/archive/sipx-users/
