Yes, just to confirm, it's 100% 5080 that I'm using. I use IP authentication for the SIP trunk, with incoming calls going to [email protected]:5080.
________________________________ From: [email protected] [[email protected]] on behalf of Michael Picher [[email protected]] Sent: November 30, 2012 2:49 PM To: Discussion list for users of sipXecs software Subject: Re: [sipx-users] sipx 4.6 inbound ivr-->extension always not available you'll find you have transfer issues and whatnot with port 5060... it is not the right port. 5080 is where sipXbridge is listening on. this is not a typo. the proxy listens on port 5080. mike On Fri, Nov 30, 2012 at 4:21 PM, Trevor L Benson <[email protected]<mailto:[email protected]>> wrote: Nicholas, This has been on my mind a little over the past few days, was this just a typo from the 4.4 configuration for ITSP's using 5080 inbound, or is the ITSP still sending to you on 5080? We tested out inbound on 5060 (albeit weeks ago and many updates) and it was working fine. I am guessing its a typo, or you configured your system properly to still use 5080, but it's sticking in my craw that maybe this isn't a typo or the ITSP is sending to the wrong port? I have not tested the 5080 inbound on openUC 4.6 instead of 5060. Checking Devices -> SIP Trunk SBCs shows that sipXbridge-1 has port 5080 listed. Features -> NAT Traversal under Server Config shows the private IP, public IP, and 5060 for SIP port and 5061 for TLS SIP port. It could very well work that 5080 inbound from ITSP's still functions as it did in 4.4 and I think I remember someone saying you could use either or both? However I haven't bothered to test it yet since I was ecstatic to get native 5060 for some picky providers and since that appeared to be working over a month ago in our tests I just wanted to ask if the calls were really sent to 5080 or 5060? Trevor On Nov 28, 2012, at 5:05 PM, Nicholas Drayer <[email protected]<mailto:[email protected]>> wrote: It’s only when a call comes in via the sipXecs server’s 5080 port that the Bria client exhibits no audio sent/received. _______________________________________________ sipx-users mailing list [email protected]<mailto:[email protected]> List Archive: http://list.sipfoundry.org/archive/sipx-users/ -- Michael Picher, Director of Technical Services eZuce, Inc. 300 Brickstone Square Suite 201 Andover, MA. 01810 O.978-296-1005 X2015 M.207-956-0262 @mpicher <http://twitter.com/mpicher> linkedin<http://www.linkedin.com/profile/view?id=35504760&trk=tab_pro> www.ezuce.com<http://www.ezuce.com> ------------------------------------------------------------------------------------------------------------ "The best way to predict the future is to invent it." - Alan Kay
_______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/
