Hi,
I used 2 extension to test the initializing and uninitilizing code
eg: sip:[EMAIL PROTECTED] and sip:[EMAIL PROTECTED]
Case 1:
I registered my softphone with sip:[EMAIL PROTECTED] Setting is configured and
I'm able to make a call. I uninitialized the setting. Extension 301 is no more
attached to my PC's IP. I'm not able to perform any call. I executed the
initilize code to reinitialize the 301 setting. Setting is configured and call
can be made.
Case 2:
I registered my softphone with sip:[EMAIL PROTECTED] Setting is configured and
I'm able to make a call. I uninitialized the setting. Extension 301 is no more
attached to my PC's IP. No call can be made. Instead of reinitializing 301
setting, I used sip:[EMAIL PROTECTED] But 302 failed to be registered to my
PC's IP.
Does that mean I did not unregister my 301 setting completely, hence 302 failed
to be registered?
Have tested many times, my uninitilize and re-initialize will only work if I
perform the process on the same extension setting.
Please advise.
Regards,
Zam
----- Original Message ----
From: Joseph Serafin Aguilar <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED]
Cc: [email protected]
Sent: Wednesday, December 13, 2006 3:37:37 AM
Subject: Re: [sipxtapi-dev] Logout function in SipXtapi
Hi,
Your code looks fine. You mentioned earlier that you had a 401 error when u did
step 2. This usually (maybe even always) is an authentication thing. Make
sure the username you used exists and if so, the password must be correct. 401
usually happens if you typed an incorrect password or the username doesn't
exist at all.
There may still be other possibilities. I'll look in to it.
Regards,
Joseph
On 12/13/06, zamielia <
[EMAIL PROTECTED]> wrote:I'm now able to uninitilize my sip setting. So part 1
can be
considered completed. However I'm facing problem with part
2.
I cannot register the softphone with my new sip setting. Is
there any line missing in this set of codes? Please advise
:)
sipxInitialize(&g_hInst, 5060, 5060, 0,80000,1);
sipxEventListenerAdd(g_hInst, EventCallBack, NULL) ;
sipxLineAdd(g_hInst,m_Identity2, &g_hLine);
sipxLineAddCredential(g_hLine, m_Username, m_Password2 ,
m_RealmServer2) ;
sipxLineRegister(g_hLine, true);
Regards,
Zamielia
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]
] Sent: Tuesday,
> December 12, 2006 1:32 AM To:
> [email protected];
> [EMAIL PROTECTED]
Subject: Re: [sipxtapi-dev]
> Logout function in SipXtapi
>
> Objective to achieve : To clear sip setting (realm,
> identity,password etc), then initialize back with new sip
> setting so that user doesnt have to stop and rerun the
> program.
>
> Been away for few days. Sorry for the late reply. Right
> now, i'm developing my own code as i wanted to change the
> ezphone layout. Since all the layouts in ezphone are
> hardcoded, so i have to start fresh.
>
> Somehow i cannot use the function in sipXmgr.cpp. Based on
> the code in sipXmgr, I executed
>
> (1.) //Uninitializing sip
> setting---------------------------------------------------
> ------------------ -------------------
> sipxEventListenerRemove(g_hInst, EventCallBack,
> NULL) ;
> sipxLineRemove(g_hLine);
> //g_hLine = 0;
>
> if(sipxUnInitialize(g_hInst) != SIPX_RESULT_SUCCESS)
> {
> sipxUnInitialize(g_hInst, true);
> }
>
> -once code is executed, if i try to make call, it prompted
> assertion failure related to phLine!=NULL
>
> (2.) // initialize sipx TAPI-like
> API-------------------------------------------------------
> ------------------ -----------------------
> sipxInitialize(&g_hInst, 5060, 5060, 0,80000,1);
> sipxEventListenerAdd(g_hInst, EventCallBack, NULL) ;
> sipxLineAdd(g_hInst,m_Identity2, &g_hLine);
> sipxLineAddCredential(g_hLine, m_Username, m_Password2
> , m_RealmServer2) ;
> sipxLineRegister(g_hLine, true);
>
> -once the code is executed right after i executed code in
> (1.), when i tried to make a call, nothing happen. i
> checked at ethereal result. when call is made after
> executing item (2.), the response that i got is 401
> unauthorized error.
>
> Hope you can help me in rectifying this problem. I'm new
> to telephony stuff, sorry for any inconveniences caused :)
>
> Regards,
> Zamielia
>
> ----------------------------------------------------------
_______________________________________________
sipxtapi-dev mailing list
[email protected]
List Archive:
http://list.sipfoundry.org/archive/sipxtapi-dev/
_______________________________________________
sipxtapi-dev mailing list
[email protected]
List Archive: http://list.sipfoundry.org/archive/sipxtapi-dev/
____________________________________________________________________________________
Want to start your own business?
Learn how on Yahoo! Small Business.
http://smallbusiness.yahoo.com/r-index_______________________________________________
sipxtapi-dev mailing list
[email protected]
List Archive: http://list.sipfoundry.org/archive/sipxtapi-dev/
