on the topic of the ata100 cards, i managed to get an 'abit hotrod 100' card
working.
but was only able to get it working with kernel 2.2.16 since there was a
patch available for it.
http://www.abit.com.tw/english/product/peripheral%20cards/h100.htm
with the patch being here ->
http://www.highpoint-tech.com/ide.2.2.16.20000630.patch.bz2
Since its patched, itll detect it as a hpt366 when infact its a hpt370
Im using slack 7.1 w/resier and a hpt370 card.
If anyone has got this card working with a kernel other than 2.2.16, let me
know.
thanks.
Btw, i used just a single boot so i didnt have the plethora of problems you
had.
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Arunava Sen
Sent: Tuesday, 12 December 2000 2:56 PM
To: [EMAIL PROTECTED]
Subject: Re: [SLUG] lilo problems
Martin wrote:
> I recently built a new box for an upgrade, and used a KT7 Abit
> Motherboard that has hardware support for raid via a second IDE
> controller, a Highpoint HPT366 (ATA100).
I have a KT7-raid as well. I can confirm that your (our) motherboard does
*not* have a HPT366 controller, but in fact, uses a HPT370 controller. That
might not help you with your lilo problem, but it might later cause
problems if your kernel doesnt support the HPT370.
Arun
--
SLUG - Sydney Linux User Group Mailing List - http://slug.org.au/
More Info: http://slug.org.au/lists/listinfo/slug
--
SLUG - Sydney Linux User Group Mailing List - http://slug.org.au/
More Info: http://slug.org.au/lists/listinfo/slug
