Would be nice if they would put a jack on it just if nothing else we could
use it for testing with the cool setup utilities SB has for the indoor
units.....

JH
----- Original Message -----
From: "Eje Gustafsson" <[EMAIL PROTECTED]>
To: "phantam" <[EMAIL PROTECTED]>
Sent: Tuesday, May 27, 2003 7:08 PM
Subject: Re: [smartBridges] PCMCIA CArd


> In FCC territory that is not legal to do. That is considered a
> modification and will require a new system certification.
>
> Best regards,
>  Eje Gustafsson                       mailto:[EMAIL PROTECTED]
> The Family Entertainment Network      http://www.fament.com
> Phone : 620-231-7777                  Fax   : 620-231-4066
>      - Your Full Time Professionals -
> eBay UserID : macahan
> ---
> searchable smartBridges mailing list archive.
> http://www.mail-archive.com/smartbridges40part-15.org/
> --
> p> External jack on the sb unit would be nice (the card) anyone solder one
on
> p> yet?
>
> p> Chris
>
> p> -----Original Message-----
> p> From: Patti Jones [mailto:[EMAIL PROTECTED]
> p> Sent: Tuesday, May 27, 2003 9:44 PM
> p> To: [EMAIL PROTECTED]
>
> p> I do too but there was talk of someone making a SB card drivers to work
with
> p> the SB products.  Then I could get the full test signal.
>
> p> Patti
> p> ----- Original Message -----
> p> From: "Joe" <[EMAIL PROTECTED]>
> p> To: <[EMAIL PROTECTED]>
> p> Sent: Tuesday, May 27, 2003 6:01 PM
> p> Subject: RE: [smartBridges] PCMCIA CArd
>
>
> p>   I use a Gold Card on my handheld with various free software and have
good
> p> results.
> p>       Joe
> p>     RiverNet
>
> p> -----Original Message-----
> p> From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]
> p> On Behalf Of Support(at)inet2000.com
> p> Sent: Tuesday, May 27, 2003 5:48 PM
> p> To: [EMAIL PROTECTED]
> p> Subject: Re: [smartBridges] PCMCIA CArd
>
>
> p> I'd be interested in these as well I think.  We're looking
> p> to use a CE handheld to do some site surveys if possible.
> p> We havn't had much luck finding 802.11b CF Cards with
> p> external antenna jacks, so a PCMCIA card (along with a
> p> PCMCIA to CF adapter) may work, as long as we can get
> p> Windows CE Drivers / software for our PDA.
>
> p> Any suggestions / success stories would be appreciated...  :-)
>
> p> Todd
>
> p> From: "Patti Jones" <[EMAIL PROTECTED]>
> >> Did anyone get any handheld drivers for the sb pcmcia card?  I thought
> >> someone was working on those?
> >>
> >> Patti
>
> p> The PART-15.ORG smartBridges Discussion List
> p> To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
> p> smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in
the
> p> body type unsubscribe smartBridges)
> p> Archives: http://198.63.203.6
>
> p> The PART-15.ORG smartBridges Discussion List
> p> To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
> p> smartBridges <yournickname>
> p> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
> p> smartBridges)
> p> Archives: http://198.63.203.6
>
>
>
> p> The PART-15.ORG smartBridges Discussion List
> p> To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
> p> smartBridges <yournickname>
> p> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
> p> smartBridges)
> p> Archives: http://198.63.203.6
>
> ---
> [This E-mail scanned for viruses by Declude Virus]
>
> The PART-15.ORG smartBridges Discussion List
> To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
smartBridges <yournickname>
> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
smartBridges)
> Archives: http://198.63.203.6

The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges 
<yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges)
Archives: http://198.63.203.6  

Reply via email to