Yes, my 2 flakey units are with the latest shipment. I don't know if it has anything to do with that I'm using the standard rubber duck antenna on them, but the signal strength is plenty strong.
Thanks, Roger ----- Original Message ----- From: "David Blood" <[EMAIL PROTECTED]> To: "[EMAIL PROTECTED] org" <[EMAIL PROTECTED]> Sent: Tuesday, June 10, 2003 12:52 PM Subject: RE: [smartBridges] trouble with units. > With my last shipment of sb2100 I am having terrible issues. I don't believe > that it is the configuration as I have set up many of these and have not had > these problems in the past. > > Issues. > > Ethernet port is flaky. Sometimes it works and sometime it doesn't. No > distance is not an issue on the ethernet cable. All case less than 50 ft > and in one case less than 5 ft. It seems to happen when I make any > configuration change. I can power cycle the unit to get it to come back. > > When I try to use site survey to list availabe APs I get nothing. When it > does work then several aps show up. > > The air bridges lose associations and then wil not reassociate with out a > reboot. > > > Anyone else having these issues with the latest shipments? > > Kind Regards, > > David > > > > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) > Archives: http://198.63.203.6 The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://198.63.203.6
