Yes, My last one would not see the AP and the ethernet and wireless lights would go out when you did a search for wireless networks. It would see the network when you rebooted, but when you tried to assoc. it, it would again loose both lights and freeze. Luckily, we purchased them from electro comm and they RMA'd them without trouble.
Scott -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of David Blood Sent: Tuesday, June 10, 2003 10:52 AM To: [EMAIL PROTECTED] org Subject: RE: [smartBridges] trouble with units. With my last shipment of sb2100 I am having terrible issues. I don't believe that it is the configuration as I have set up many of these and have not had these problems in the past. Issues. Ethernet port is flaky. Sometimes it works and sometime it doesn't. No distance is not an issue on the ethernet cable. All case less than 50 ft and in one case less than 5 ft. It seems to happen when I make any configuration change. I can power cycle the unit to get it to come back. When I try to use site survey to list availabe APs I get nothing. When it does work then several aps show up. The air bridges lose associations and then wil not reassociate with out a reboot. Anyone else having these issues with the latest shipments? Kind Regards, David The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://198.63.203.6 The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://198.63.203.6
